Performa3 S206 - Loudspeaker Revel - Free user manual and instructions
Find the device manual for free Performa3 S206 Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floorstanding Loudspeaker |
| Brand | Revel |
| Model | Performa3 S206 |
| Category | Passive Loudspeaker |
| Design | 3-way bass-reflex |
| Driver Configuration | 1\" tweeter, 6.5\" midrange, dual 6.5\" woofers |
| Frequency Response | 35 Hz - 40 kHz |
| Sensitivity | 90 dB (2.83V/1m) |
| Nominal Impedance | 8 ohms |
| Recommended Amplifier Power | 25 - 300 Watts RMS |
| Crossover Frequency | 250 Hz / 2.2 kHz |
| Dimensions (H x W x D) | 44.5\" x 15.5\" x 17.5\" (1130 x 394 x 445 mm) |
| Weight | 70 lbs (31.8 kg) |
| Enclosure Type | Bass-reflex with rear-firing port |
| Input Terminals | Gold-plated binding posts, bi-wire/bi-amp capable |
| Available Finishes | Gloss Black, Walnut |
| Care & Maintenance | Wipe with soft dry cloth, avoid solvents |
| Safety Instruction | Place on stable surface away from heat sources |
| Replacement Parts | Available through authorized Revel dealers |
| Repair Service | Contact Revel service center for diagnostics |
| Power Source | None (passive design) |
Frequently Asked Questions - Performa3 S206 Revel
How do I connect the Performa3 S206 to my amplifier?
Use high-quality speaker cables and connect them to the gold-plated binding posts on the rear panel. Ensure all connections are tight and the polarity is correct (positive to positive, negative to negative).
What is the recommended placement for optimal sound?
Position the speakers at least 6 feet apart and away from walls to minimize bass reflections. Angle them slightly toward the listening position for a focused soundstage.
Can I bi-wire or bi-amp the S206?
Yes, the S206 features separate binding posts for high and low frequency inputs. To bi-wire or bi-amp, remove the metal jumpers between the posts and connect separate cables to each section.
What is the best way to clean the loudspeaker?
Use a soft, dry cloth to gently wipe the cabinet. Avoid using any solvents or abrasive cleaners, as they can damage the finish.
How many drivers does the S206 have?
The S206 is a 3-way design with a total of 4 drivers: one 1-inch tweeter, one 6.5-inch midrange, and two 6.5-inch woofers.
What is the frequency response of the S206?
The S206 delivers a frequency response of 35 Hz to 40 kHz, covering the full audible range with extended high-frequency detail.
Does the S206 need a subwoofer?
The S206 can produce deep bass down to 35 Hz, which is sufficient for most music. For movie effects with very low content, adding a subwoofer may enhance the experience.
What type of amplifier is recommended?
Use an amplifier capable of delivering 25 to 300 Watts RMS per channel into 8 ohms. High-quality solid-state or tube amplifiers with good current capability are ideal.
Are the drivers replaceable?
Yes, all drivers are individually replaceable. Contact an authorized Revel dealer for exact replacement parts and professional installation.
How should I install the speaker stands or floor spikes?
The S206 is a floorstanding speaker and comes with adjustable spikes for stable placement. Screw the spikes into the threaded inserts, then level the speaker using a bubble level.
User questions about Performa3 S206 Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Performa3 S206 - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Performa3 S206 by Revel.
USER MANUAL Performa3 S206 Revel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Revel
Model : Performa3 S206
Category : Loudspeaker