W383 - Loudspeaker Revel - Free user manual and instructions
Find the device manual for free W383 Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of device | Bookshelf loudspeaker |
| Brand | Revel |
| Model | W383 |
| Speaker design | 2-way bass reflex |
| Woofer driver | 6.5-inch aluminum cone |
| Tweeter driver | 1-inch aluminum dome |
| Frequency response | 50 Hz - 22 kHz ±3 dB |
| Impedance | 8 ohms |
| Sensitivity | 87 dB @ 1W/1m |
| Recommended amplifier power | 20 - 150 watts RMS |
| Crossover frequency | 2.2 kHz |
| Enclosure finish | High-gloss black or real wood veneer |
| Dimensions (W x H x D) | 12.2 x 15.4 x 9.8 inches |
| Weight | 18.5 lbs each |
| Connectors | 4 binding posts for bare wire, banana plugs, spades |
| Mounting options | Bookshelf or speaker stand |
| Included accessories | Grille, rubber feet, user manual |
| Cleaning instructions | Wipe with a soft dry cloth; avoid liquids and aerosols |
| Safety precautions | Keep away from moisture; do not overload the amplifier |
| Repairability | Drivers and crossover are individually replaceable |
| Intended use | Stereo music and home theater systems |
Frequently Asked Questions - W383 Revel
How do I connect the W383 to my amplifier?
Use the binding posts on the rear of the speaker. Strip 1/2 inch of insulation from the speaker wire, then insert the wire into the post and tighten the cap. Ensure the positive terminal connects to the amplifier's positive output. Aim for a secure, clean connection to avoid short circuits.
What is the optimal placement for the W383 speakers?
Position the speakers at ear level, ideally on dedicated stands or sturdy bookshelves. Place them at least 12 inches from walls to reduce bass reflections. Angle them slightly toward the listening area, and maintain an equal distance from the primary listening position for proper stereo imaging.
What amplifier power is recommended for the W383?
The W383 performs best with an amplifier delivering between 20 and 150 watts RMS per channel. This range provides sufficient headroom for clean dynamics while protecting the speaker from distortion. Always avoid clipping the amplifier, as that can damage the tweeter.
How should I clean the Revel W383 loudspeakers?
Clean the cabinet with a soft, dry microfiber cloth. For stubborn marks, slightly dampen the cloth with water and wipe gently. Do not use solvents, abrasives, or both spray and liquid cleaners, as these may damage the finish or the driver diaphragms.
What is the frequency response of the W383?
The W383 has a frequency response of 50 Hz to 22 kHz ±3 dB. This wide range ensures accurate reproduction of both bass lines and high-frequency detail, making the speaker suitable for various music genres and movie soundtracks.
Can I use a subwoofer with the W383 speakers?
Yes, the W383 can be paired with a subwoofer for additional low-end extension. Connect the subwoofer to the receiver's subwoofer output, and set the W383 speakers to 'small' in the receiver's crossover menu. A typical crossover of 80 Hz works well.
How long does it take to break in the W383 speakers?
The W383 speakers benefit from a break-in period of approximately 20-30 hours of playback at moderate volume. During this time, the suspension components loosen slightly, resulting in smoother bass and an open, natural sound.
Are the speaker grilles removable?
Yes, the W383 grilles are magnetically attached and can be easily removed for a more transparent presentation. When removed, be careful with the exposed drivers, and press the grilles back into place until they click securely.
Does the W383 come with a warranty?
Revel usually provides a limited warranty that covers defects in materials and workmanship for a period of five years from the original purchase date. Keep your receipt and contact an authorized Revel dealer for service.
What should I do if the speaker produces no sound?
Check the amplifier source and ensure the speaker connects securely. Verify that the receiver is set to the correct channel and volume. If the issue persists, try swapping the speaker cables to isolate any wiring faults. A multimeter can test the speaker's impedance; a stable reading near 8 ohms indicates the driver is functional.
User questions about W383 Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual W383 - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W383 by Revel.
USER MANUAL W383 Revel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Revel
Model : W383
Category : Loudspeaker