LC-M3710 - Monitor SHARP - Free user manual and instructions
Find the device manual for free LC-M3710 SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Monitor |
| Brand | Sharp |
| Model | LC-M3710 |
| Screen Size | 37 inches (94 cm) |
| Display Resolution | 1366 x 768 pixels (HD Ready) |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Contrast Ratio | 1200:1 |
| Viewing Angle | 178° H / 178° V |
| Response Time | 8 ms |
| Built-in Speakers | 2 x 10 W |
| Connectivity | HDMI, VGA, Component, Composite |
| VESA Mounting | 200 x 200 mm |
| Power Consumption | Approximately 200 W (typical), <1 W standby |
| Dimensions (without stand) | 89.7 x 60.5 x 12.0 cm |
| Dimensions (with stand) | 89.7 x 65.0 x 30.0 cm |
| Weight (without stand) | 16.5 kg |
| Remote Control | Included |
| Maintenance | Clean with a soft, lint-free cloth; do not use abrasive cleaners |
| Safety Warning | Operate only with the specified power source; avoid opening the cabinet |
Frequently Asked Questions - LC-M3710 SHARP
What is the native resolution of the Sharp LC-M3710?
The Sharp LC-M3710 has a native resolution of 1366 x 768 pixels, making it an HD Ready display. It is optimized for 720p content, but can accept 1080p signals and downscale them.
How can I clean the monitor screen safely?
Turn off the monitor and unplug it. Wipe the screen gently with a soft, dry, lint-free cloth. For stubborn stains, slightly dampen the cloth with water; do not use alcohol, ammonia, or abrasive cleaners.
Can the LC-M3710 be wall-mounted?
Yes, the monitor is VESA compatible with a 200 x 200 mm mounting pattern. Use a wall-mount bracket that supports a 37-inch display and the monitor's weight (approximately 16.5 kg without stand).
What should I do if there is no sound from the speakers?
Check whether the speakers are enabled in the audio menu and ensure the volume is not set to minimum or muted. Verify that the connected device's audio output is correctly routed to the monitor, especially when using HDMI or VGA connections.
How do I connect a personal computer to this monitor?
Use a VGA or HDMI cable to connect your PC to the corresponding input on the monitor. Then press the "INPUT" button on the remote or monitor to select the correct source. Adjust the display settings on your PC to match the native resolution of 1366 x 768.
Does the Sharp LC-M3710 support Full HD 1080p?
No, the panel has a physical resolution of 1366 x 768 pixels. It can accept a 1080p signal, but it will be downscaled to fit the screen. For full HD quality, consider a monitor with 1920 x 1080 native resolution.
What is the power consumption of the LC-M3710?
The typical power consumption is approximately 200 W during normal use, and less than 1 W in standby mode. Using the ECO or power-saving mode can reduce consumption.
How can I reset the monitor to factory settings?
Press the "MENU" button to open the OSD, navigate to the Setup or System menu, and select Reset or Factory Defaults. Confirm your selection to restore all picture and audio settings to their original values.
Is a remote control included with the monitor?
Yes, the Sharp LC-M3710 comes with a remote control and batteries. The remote allows you to adjust settings, change inputs, and control the power and volume. If lost, you can use the buttons on the monitor itself, but full functionality requires the remote.
How do I switch between input sources on the LC-M3710?
Use the INPUT or SOURCE button on the remote control or on the monitor side panel. Press it repeatedly to cycle through available inputs such as HDMI, VGA, Component, and Composite. The selected input will appear on the screen.
User questions about LC-M3710 SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual LC-M3710 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LC-M3710 by SHARP.
USER MANUAL LC-M3710 SHARP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHARP
Model : LC-M3710
Category : Monitor