MD-300Np-360P - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free MD-300Np-360P Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera (Dome) |
| Brand | Brickcom |
| Model | MD-300Np-360P |
| Image Sensor | 1/3" Progressive CMOS |
| Resolution | 3 Megapixels (2048 x 1536) |
| Lens | 360° panoramic fisheye lens |
| Minimum Illumination | 0.1 lux (color), 0.01 lux (B/W) |
| Night Vision | Built-in IR LEDs, up to 10 m |
| Power Supply | PoE IEEE 802.3af / 12V DC |
| Power Consumption | Max 7W |
| Dimensions | Ø100 mm x 45 mm |
| Weight | 250 g |
| Operating Temperature | -20°C to 50°C |
| Storage Humidity | 10% – 90% non-condensing |
| Main Functions | Motion detection, privacy mask, remote access |
| Security | HTTPS encryption, WPA/WPA2, IEEE 802.1X authentication |
| Maintenance | Clean lens with soft, dry microfibre cloth |
| Repairability | Spare parts available from authorized Brickcom service centers |
| General Info | User manual downloadable in 34-page PDF |
Frequently Asked Questions - MD-300Np-360P Brickcom
How do I reset the Brickcom MD-300Np-360P to factory defaults?
Press and hold the Reset button on the back of the camera for 10 seconds. The camera will reboot and restore the default settings, including the default IP address.
What is the default IP address and credentials?
The default IP is 192.168.1.168 (or as provided in the manual). The default username is admin and password is blank or set on first login.
How to configure motion detection?
Log into the web interface, go to Event Configuration, then Motion Detection. Enable it, draw detection areas, and set the sensitivity and alarm actions (email, trigger digital output).
Can I view the camera remotely over the internet?
Yes, set up port forwarding on your router or use the Brickcom DDNS service and add a port (default HTTP 80 or RTSP 554) to reach the camera from outside.
How to connect the camera to a Wi-Fi network?
This model is PoE and 10/100 Ethernet; it does not have built-in Wi-Fi. For wireless setup, use a PoE to Wi-Fi converter or a separate wireless bridge.
How to update the firmware?
Download the latest firmware from the Brickcom support site, then log into the web interface, go to Maintenance → Firmware Upgrade and select the file. Do not disconnect during upload.
What formats does the camera support for video recording?
It supports H.264 and MJPG compression and can stream MP4 or AVI via the software. It also supports NAS and SD card storage if available.
How to set privacy masks?
In Video Settings → Privacy Mask, enable and drag the mouse to define masked regions on the live image.
What is the warranty period for this camera?
Brickcom provides a 2-year limited warranty for hardware defects, subject to conditions. Contact local distributor for details.
How to clean the lens?
Use a soft dry microfibre cloth to gently wipe the lens. Do not use water or cleaning agents; they may damage the coating.
User questions about MD-300Np-360P Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual MD-300Np-360P - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD-300Np-360P by Brickcom.
USER MANUAL MD-300Np-360P Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : MD-300Np-360P
Category : Security Camera