FB-130Ap - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free FB-130Ap Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Brickcom |
| Model | FB-130Ap |
| Product Type | Security Camera |
| Image Sensor | 1/3" CMOS |
| Resolution | 1.3 Megapixel (1280x1024) |
| Lens | Fixed 3.6mm |
| Night Vision | IR LEDs with 15m range |
| Network Interface | Ethernet RJ-45 with PoE support |
| Video Compression | H.264 / MPEG-4 / MJPEG |
| Weatherproof Rating | IP66 |
| Dimensions (W x H x D) | 65 x 145 x 65 mm |
| Weight | 480g |
| Power Supply | DC 12V or PoE 802.3af |
| Power Consumption | 6W (max) |
| Operating Temperature | -10°C to 50°C |
| Storage | MicroSD card slot |
| Motion Detection | Yes, configurable zones |
| Privacy Mask | Supports up to 3 areas |
| Security | Multi-level password protection |
| Maintenance | Clean lens with soft dry cloth |
| Spare Parts | Available from authorized dealers |
Frequently Asked Questions - FB-130Ap Brickcom
How to reset the camera to factory defaults?
Locate the reset button on the camera, press and hold it for 10 seconds while the camera is powered on. The camera will restore its factory settings, including default IP address and login credentials.
How to access the camera via a web browser?
Find the camera's IP address using the provided software or DHCP, then enter it in your browser. The default username is admin and password is blank. Use Internet Explorer or Edge with ActiveX for first-time setup.
How to set up motion detection alerts?
Go to Configuration > Motion Detection, enable the feature, and draw the detection areas on the video preview. You can then set up email alerts or FTP upload through the notification settings.
What is the default IP address?
The default IP address for this camera is 192.168.1.168. Ensure your computer is on the same subnet, then open the browser to access the web interface.
How to install the camera outdoors?
Choose a stable mounting surface, use the included mounting bracket, and run the Ethernet cable through a weatherproof conduit. The camera is IP66-rated, so it can withstand rain and dust.
How to update the firmware?
Download the latest firmware file from the official Brickcom website. In the web interface, go to Maintenance > Firmware Upgrade, select the file and click Upgrade. Do not disconnect power during the upgrade.
How to enable night vision mode?
The camera has an IR-cut filter that automatically switches to night mode in low light. You can also manually control it in Configuration > Camera Settings > Day/Night to set a light threshold for switching.
How to connect the camera to a Wi-Fi network?
This model is wired-only and does not support Wi-Fi. Connect it to your router using an Ethernet cable for reliable transmission.
How to adjust video quality and resolution?
Navigate to Configuration > Video Settings. You can set the main stream resolution to 1280x1024 at 15 fps, and adjust the bitrate and H.264 quality according to your needs.
How to clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. If dirt remains, use a small amount of lens cleaning solution applied to the cloth, not directly to the lens. Do not use abrasive materials.
User questions about FB-130Ap Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FB-130Ap - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FB-130Ap by Brickcom.
USER MANUAL FB-130Ap Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : FB-130Ap
Category : Security Camera