FB-300AP - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free FB-300AP Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Brickcom |
| Model | FB-300AP |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 3 Megapixels (2048 x 1536) |
| Lens Type | Fixed focal 3.6 mm, F1.8 |
| Night Vision | Yes (IR LEDs, up to 20 m) |
| Network Connection | Wired 10/100 Ethernet with PoE |
| Power Source | PoE (802.3af) or DC 12V, Max 6W |
| Dimensions | 75 x 60 x 130 mm (D x W x H) |
| Weight | 450 g |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -30°C to 60°C |
| Ingress Protection | IP66 |
| Main Functions | Video surveillance, motion detection, two-way audio |
| Remote Access | Mobile app and web browser |
| Cleaning | Use soft dry cloth for lens |
| Maintenance | Regular inspection of cables and mounting |
| Safety | Follow local electrical regulations; use surge protection |
| Spare Parts and Repairability | Authorized service center only |
Frequently Asked Questions - FB-300AP Brickcom
How do I connect the FB-300AP to my network?
Connect the camera to your router using an Ethernet cable. Ensure the camera is powered via PoE or the included adapter. Use the manufacturer's software or web browser to access the camera's IP address. For detailed steps, refer to the user manual.
What are the default login credentials?
The default username and password are typically admin and admin (or blank). For security, change them during first setup. Check the manual for exact defaults.
Can I monitor footage on my smartphone?
Yes, the camera supports remote viewing through the official mobile app or third-party software. Ensure the camera is connected to the internet and configure port forwarding or use a cloud service.
How do I reset the camera to factory settings?
Locate the reset button on the device and press and hold it for 10 seconds while the camera is powered. The camera will reboot and restore default settings.
Does the FB-300AP have night vision?
Yes, the camera is equipped with IR LEDs for night vision, providing visibility up to 20 meters in complete darkness.
How do I record videos?
You can record videos using a microSD card (if supported), an NVR, or on your computer through monitoring software. Enable recording schedule in the camera settings.
Is the camera suitable for outdoor use?
The FB-300AP features a weatherproof housing with IP66 rating, making it suitable for outdoor installations. Ensure it is properly sealed to maintain protection.
How do I update the firmware?
Check the manufacturer's website for the latest firmware. Download the file, then access the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not interrupt the process.
The camera is not showing any video, what should I do?
Verify all connections are secure, ensure the camera is powered and the network is functioning. Check the IP address and try restarting the camera. If the issue persists, perform a factory reset.
Can I use multiple cameras in one system?
Yes, you can connect multiple Brickcom cameras to your monitoring setup. Assign a unique IP to each camera and configure them in the same software interface.
User questions about FB-300AP Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FB-300AP - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FB-300AP by Brickcom.
USER MANUAL FB-300AP Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : FB-300AP
Category : Security Camera