ESA-7600G - Ignition ENGENIUS - Free user manual and instructions
Find the device manual for free ESA-7600G ENGENIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Ports | 16 × 10/100/1000 Mbps |
| Switching Capacity | 32 Gbps |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q, up to 256 VLANs |
| Security Features | 802.1X, ACL, Storm Control |
| QoS | 4 priority queues |
| Management | Web GUI, CLI, SNMP v1/v2 |
| Power Supply | 100–240V AC, 50/60Hz |
| Power Consumption | 18W max |
| Dimensions (W×D×H) | 440 × 200 × 44 mm |
| Weight | 2.2 kg |
| Mounting | 19-inch rack mountable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Cooling | Fanless design |
| Indicators | Power, Link/Activity LEDs |
| Cleaning | Wipe with dry soft cloth; avoid liquids |
| Certifications | CE, FCC |
| Warranty | 2 years |
Frequently Asked Questions - ESA-7600G ENGENIUS
What is the default IP address for the switch?
The default IP is 192.168.0.1. If your network uses a different subnet, use the console port to reset credentials.
How do I reset the switch to factory defaults?
Press and hold the Reset button for 10 seconds with the device powered on. Wait for the switch to restart.
Does the ESA-7600G support Power over Ethernet (PoE)?
No, this model does not provide PoE. It is a pure data switch requiring a separate power source for endpoints.
Can I manage the switch from a remote location?
Yes, you can enable remote management via the web GUI or use SNMP for network management systems.
How to configure a VLAN?
In the web GUI, go to VLAN > 802.1Q, click Add, enter the VLAN ID, and assign member ports with appropriate untagged/tagged settings.
What should I do if the switch runs hot?
Ensure the ambient temperature is below 40°C and that the device has proper air circulation. The fanless design relies on passive cooling.
How to update the firmware?
Access the web GUI, navigate to System > Firmware Upgrade, choose the downloaded file, and click Upgrade. Do not power off during the process.
Does the switch support link aggregation?
Yes, it supports port trunking (IEEE 802.3ad) for up to 4 groups.
What are the maintenance requirements?
Periodically clean the exterior with a soft, dry cloth. Do not use liquid cleaners or spray directly on the device.
How many VLANs can I create?
It supports up to 256 VLANs according to IEEE 802.1Q standards.
User questions about ESA-7600G ENGENIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual ESA-7600G - ENGENIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESA-7600G by ENGENIUS.
USER MANUAL ESA-7600G ENGENIUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENGENIUS
Model : ESA-7600G
Category : Ignition