220-141 - Pressure washer Hamron - Free user manual and instructions
Find the device manual for free 220-141 Hamron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | Hamron |
| Model | 220-141 |
| Power Supply | 230 V ~ 50 Hz |
| Power Rating | 1400 W |
| Max. Pressure | 110 bar (1595 psi) |
| Water Flow Rate | 420 L/h |
| Hose Length | 5 m |
| Power Cord Length | 5 m |
| Water Inlet Temperature | Max. 40 °C |
| Safety Features | Thermal cut-off, Total Stop System |
| Weight | 6.5 kg |
| Dimensions (W x H x D) | 250 x 550 x 300 mm |
| Included Accessories | Adjustable spray lance, turbo nozzle, soap bottle, filter |
| Motor Type | Induction motor |
| Noise Level | 75 dB(A) approx. |
| Maintenance | Clean water filter regularly; drain pump after use |
| Spare Parts Availability | Replaceable hoses, nozzles, seals and trigger guns |
| Certification | CE |
Frequently Asked Questions - 220-141 Hamron
How do I connect the pressure washer to a water supply?
Connect the garden hose to the water inlet using the included adapter. Ensure the water supply is turned on, and the inlet filter is clean. Use a hose with a minimum diameter of 13 mm (1/2 inch) and maximum length of 15 m for optimal performance.
What type of detergent should I use?
Use only detergent specifically designed for pressure washers. Insert the suction hose into the detergent bottle and attach a low-pressure nozzle to draw the solution. Avoid using corrosive or flammable chemicals.
How do I replace a damaged hose?
Replace the high-pressure hose with an original spare part. Disconnect the hose from the trigger gun and the unit, then attach the new hose securely. Tighten couplings by hand to avoid seizing.
Can I use the pressure washer with a static water tank?
Yes, the device supports self-priming. Connect a supply hose with a filter to the inlet and fill the pump with water before starting. The maximum suction height is 1 meter.
What is the maximum operating pressure?
The maximum rated pressure is 110 bar (1595 psi). This is suitable for cleaning vehicles, patios, and garden furniture. Do not exceed the recommended pressure on delicate surfaces.
How do I store the pressure washer after use?
Disconnect power and water, then depressurize by triggering the gun until no water flows. Drain the pump and hoses to prevent frost damage. Store indoors at a temperature above 0°C, with the hose coiled.
Why is the motor running but no water is spraying?
Check that the water supply is open and the inlet filter is not clogged. If the pump is not priming, fill the suction hose with water. Also inspect the high-pressure nozzle for blockages and clean it with the cleaning needle.
What safety features does this pressure washer have?
It is equipped with a thermal cut-off that stops the motor if overloaded, and a total stop system (TSS) that shuts down the motor when the trigger is not depressed, saving energy and extending pump life.
How often should I clean the inlet filter?
Inspect the inlet filter before each use and clean it at least once a month, or more often if the water source contains debris. A clogged filter reduces performance and can damage the pump.
Where can I find spare parts for this model?
Spare parts such as hoses, nozzles, and seals are available at authorized Hamron dealers or through the manufacturer's online service portal. Always use genuine parts for safe operation.
User questions about 220-141 Hamron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual 220-141 - Hamron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 220-141 by Hamron.