001-200 - Pressure washer Hamron - Free user manual and instructions
Find the device manual for free 001-200 Hamron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | Hamron |
| Model | 001-200 |
| Dimensions (L x W x H) | 400 x 300 x 800 mm |
| Weight | 12 kg |
| Power Supply | 230 V ~ 50 Hz |
| Rated Power | 1800 W |
| Max Pressure | 120 bar |
| Max Water Flow | 400 l/h |
| Max Inlet Water Temperature | 40 °C |
| Hose Length | 8 m |
| Power Cable Length | 5 m |
| Protection Class | IPX5 |
| Main Functions | High-pressure cleaning, detergent application, adjustable nozzle |
| Maintenance | Clean inlet filter regularly, check oil level, winterize |
| Safety Features | Thermal overload protection, pressure relief valve, safety lock on trigger |
| Spare Parts | Replaceable nozzle, hose, trigger gun, seals |
| Repairability | User-serviceable with available parts; consult manual |
| General Info | Free PDF manual available at notice-facile.com |
Frequently Asked Questions - 001-200 Hamron
How do I start the pressure washer?
Connect the hose to a water source, turn on the water, plug the unit into a power outlet, and press the ON switch. Release the trigger after use.
What type of detergent can I use?
Use only biodegradable detergents recommended for high-pressure washers. Never use flammable liquids or solvents.
How often should I clean the inlet filter?
Check and clean the inlet filter after every 10 hours of use or if you notice reduced water flow. A clogged filter can damage the pump.
Can I use an extension cord?
Yes, but ensure the extension cord is rated for outdoor use, has a minimum gauge of 14 AWG, and is no longer than 30 meters to avoid voltage drop.
What should I do if the pressure washer turns off during use?
This may be due to thermal overload protection. Turn off the unit, let it cool down for 15-20 minutes, then restart. Check for proper water flow.
How do I store the pressure washer in winter?
Drain all water from the unit, hoses, and accessories. Add antifreeze specially designed for pressure washers, or store indoors above freezing.
Why is the water flow low?
Check that the water source is fully open, the hose is not kinked, and the inlet filter is clean. Also, ensure the nozzle is not clogged.
Can I adjust the pressure?
Yes, use the adjustable nozzle to vary the spray pattern and pressure. Some models have a pressure regulator valve. Refer to the manual.
How do I replace the nozzle?
Turn off the unit and relieve pressure by squeezing the trigger. Remove the old nozzle by pulling or unscrewing it, then attach the new one. Ensure it is secure before use.
Is the pressure washer safe for car washing?
Yes, but use a wide-angle spray pattern (e.g., 40°) to avoid damage to paint. Keep a distance of at least 30 cm and do not direct water at windows or edges.
User questions about 001-200 Hamron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual 001-200 - Hamron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 001-200 by Hamron.
USER MANUAL 001-200 Hamron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hamron
Model : 001-200
Category : Pressure washer