ACP 105 D - Controller Extron - Free user manual and instructions
Find the device manual for free ACP 105 D Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Controller |
| Brand | Extron |
| Model | ACP 105 D |
| Category | Controller |
| Dimensions (H x W x D) | 4.4 cm x 21.6 cm x 15.2 cm |
| Weight | 0.5 kg |
| Power Supply | 12 V DC external adapter |
| Power Consumption | 10 W |
| Processor | 32-bit ARM processor |
| Memory | 256 MB RAM, 1 GB Flash |
| Control Ports | RS-232, IR, Ethernet |
| Supported Protocols | TCP/IP, UDP, RS-232, IR |
| Mounting | Half-rack width, rack-mountable |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% non-condensing |
| Front Panel | LED indicators for power and status |
| Firmware Update | Via Ethernet using Extron software |
| Compliance | CE, UL, RoHS |
| Warranty | 3 years |
| Included Accessories | External power supply, mounting brackets |
Frequently Asked Questions - ACP 105 D Extron
What is the Extron ACP 105 D?
The Extron ACP 105 D is a controller designed for central AV system management. It provides serial, Ethernet, and IR control ports for seamless integration.
How do I connect the ACP 105 D to my network?
Connect an Ethernet cable from your network switch to the LAN port on the rear panel. The controller supports DHCP or static IP configuration via the included Global Configurator software.
Can I control the ACP 105 D remotely?
Yes, you can access the controller's web-based interface from any device on the same network. Comprehensive control and monitoring are available through Extron Global Configurator Plus or Pro software.
What devices can be controlled with the ACP 105 D?
The ACP 105 D can control a wide range of AV devices that accept RS-232, IR, or network-based commands, such as displays, projectors, switchers, and audio processors.
How do I update the firmware on the ACP 105 D?
Download the latest firmware from the Extron website, then use the Global Configurator software to upload it via the Ethernet port. Always back up your configuration before updating.
Does the ACP 105 D support Power over Ethernet (PoE)?
No, the ACP 105 D requires a 12 V DC external power supply. PoE is not supported, so ensure the included power adapter is connected.
How do I reset the ACP 105 D to factory defaults?
Press and hold the Reset button on the rear panel for at least 5 seconds while power is applied. This restores the factory settings and clears all configuration.
Is the ACP 105 D compatible with Extron Global Configurator software?
Yes, the ACP 105 D is fully compatible with Global Configurator Plus and Global Configurator Pro, allowing for easy programming and management of your control system.
What are the power requirements for the ACP 105 D?
The controller operates on 12 V DC, with a maximum power consumption of 10 W. The included external power supply accepts a standard AC input of 100-240 V, 50/60 Hz.
How do I mount the ACP 105 D in a rack?
The ACP 105 D features a half-rack width metal enclosure. Use the included mounting brackets to install it in a standard 19-inch rack, either individually or alongside other half-rack devices.
User questions about ACP 105 D Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual ACP 105 D - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACP 105 D by Extron.
USER MANUAL ACP 105 D Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : ACP 105 D
Category : Controller