MN-32QSB-W1-B - Monitor NZXT - Free user manual and instructions
Find the device manual for free MN-32QSB-W1-B NZXT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED-backlit LCD Monitor |
| Brand | NZXT |
| Model | MN-32QSB-W1-B |
| Screen Size | 31.5 inches (32-inch class) |
| Panel Type | IPS |
| Resolution | 2560 x 1440 (QHD) |
| Refresh Rate | 165 Hz |
| Response Time | 1 ms (MPRT) |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angles | 178° horizontal / 178° vertical |
| Connectivity | 2x HDMI 2.0, 1x DisplayPort 1.4, 1x USB Type-B upstream, 2x USB 3.0 Type-A downstream, 3.5mm audio out |
| Stand Functions | Height, tilt, swivel, pivot |
| VESA Compatibility | 100 x 100 mm |
| Dimensions (with Stand) | 713.5 x 593.8 x 207.3 mm (W x H x D) |
| Weight (with Stand) | 7.4 kg |
| Power Supply | AC 100-240V, 50/60Hz (external power adapter) |
| Power Consumption | 48W typical, <0.5W standby |
| Safety Features | Kensington lock slot, anti-theft, overvoltage protection |
| Included Accessories | Power adapter, DisplayPort cable, HDMI cable, USB cable, quick start guide |
| Cleaning | Use a soft dry microfiber cloth; avoid water or chemical cleaning agents |
| Repairability | Replacement parts via NZXT support; no user-serviceable components inside |
Frequently Asked Questions - MN-32QSB-W1-B NZXT
How do I enable 165Hz refresh rate on my NZXT monitor?
Connect the monitor using DisplayPort (for full 165Hz) to your graphics card. On Windows, go to Settings > System > Display > Advanced display settings, select the monitor and choose 165 Hz from the refresh rate drop-down. Make sure your GPU and cable support this speed.
Does the monitor support VESA mounting?
Yes, the MN-32QSB-W1-B has a VESA 100x100mm mounting pattern. You can remove the stand by pressing the quick-release button and install a VESA-compatible mount arm or bracket.
What cables are included in the box?
The package includes an HDMI cable, a DisplayPort cable, a USB 3.0 upstream cable, and the external power adapter. An HDMI cable is provided for console or older GPUs, while DisplayPort is recommended for full 165 Hz performance.
How do I clean the monitor screen without damaging it?
Turn off the monitor and unplug it. Use a soft, dry microfiber cloth to gently wipe the surface. For stubborn stains, lightly dampen the cloth with distilled water (not directly on the screen) and wipe. Avoid using alcohol, ammonia-based cleaners, or paper towels.
What is the best OSD setting for gaming?
For competitive gaming, enable the FPS mode in the OSD (On-Screen Display) via the joystick. Set the response time to "Overdrive" or "Fast" for reduced ghosting. You can also enable Adaptive-Sync (FreeSync) if your GPU supports it to avoid screen tearing.
Can I use this monitor with a PlayStation 5 or Xbox Series X?
Yes, the monitor supports HDMI 2.0, allowing 1440p at up to 120 Hz on supported consoles. On PS5, you may need to enable "Performance Mode" in the console's display settings. Note that VRR (Variable Refresh Rate) over HDMI requires an update on the monitor.
How to adjust the stand ergonomics?
The stand offers height adjustment (130mm), tilt (-5° to +15°), swivel (±20°), and pivot (90° clockwise). Gently grip the screen edges and apply firm but moderate pressure to adjust each axis. The pivot can be rotated after raising the screen to the highest position.
The monitor shows "No Signal". What should I do?
Check if the input source is correct by pressing the joystick to open the OSD and selecting the connected port. Verify the cable is securely attached. Reboot your PC or console. If using DisplayPort, try disconnecting and reconnecting it, or use another port on your GPU.
How do I update the firmware on this monitor?
Firmware updates are delivered via a USB flash drive or through a software utility from NZXT's official website. Download the latest firmware file, follow the instructions in the manual, and plug a USB drive into the monitor's service port (if available). Some models update via the OSD or NZXT CAM software.
Is there a warranty with this monitor?
NZXT provides a 2-year limited warranty covering defects in materials and workmanship. You can register your product on the NZXT website. For any issues, contact NZXT support or your point of purchase. Keep the original receipt as proof of purchase.
User questions about MN-32QSB-W1-B NZXT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual MN-32QSB-W1-B - NZXT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MN-32QSB-W1-B by NZXT.
USER MANUAL MN-32QSB-W1-B NZXT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NZXT
Model : MN-32QSB-W1-B
Category : Monitor