Enteroc iS1030 iSCSI - Server Rocstor - Free user manual and instructions
Find the device manual for free Enteroc iS1030 iSCSI Rocstor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | iSCSI storage server (rackmount) |
| Form factor | 1U rackmount |
| Compatible drive form factors | 2.5-inch and 3.5-inch SATA/SAS |
| Number of drive bays | 4 or 8 (depending on configuration) |
| Processor | Intel Xeon or similar server-class CPU |
| System memory | Up to 64 GB DDR4 ECC RAM |
| Network interfaces | Dual Gigabit Ethernet ports (10GbE optional) |
| iSCSI support | Target and initiator modes |
| RAID levels supported | 0, 1, 5, 6, 10, 50, 60 |
| Maximum storage capacity | Up to 64 TB (depending on drive capacity) |
| Dimensions (W x D x H) | 19 x 24 x 1.7 inches (483 x 610 x 43 mm) |
| Weight | Approximately 11.5 kg (25 lbs) |
| Power supply | Dual redundant 400W power supplies |
| Power consumption | 200W typical, 350W maximum |
| Input voltage | 100-240V AC, 50/60Hz |
| Cooling | Dual hot-swap cooling fans |
| Operating temperature | 5°C to 40°C (41°F to 104°F) |
| Operating humidity | 20% to 80% non-condensing |
| Management interface | Web-based GUI, CLI, SNMP |
| Maintenance and cleaning | Use a dry cloth; ensure vents are clear of dust |
| Safety features | Overheating protection, secure chassis lock |
| Spare parts and repairability | Hot-swap drives, PSU, fans; user-serviceable components |
| General information | Rocstor Enterprise class iSCSI storage solution |
Frequently Asked Questions - Enteroc iS1030 iSCSI Rocstor
What types of drives are compatible with the Rocstor Enteroc iS1030 iSCSI server?
The server supports both 2.5-inch and 3.5-inch SATA and SAS drives, allowing flexible storage configurations.
Can I use the Enteroc iS1030 as an iSCSI initiator as well as a target?
Yes, the Enteroc iS1030 supports both iSCSI target and initiator modes, enabling it to serve storage or connect to other iSCSI storage systems.
What RAID levels are supported?
The device supports RAID levels 0, 1, 5, 6, 10, 50, and 60, providing options for performance, redundancy, or a balance of both.
How do I perform initial setup?
Connect the server to your network, power it on, and access the web-based management interface via its default IP address. The setup wizard will guide you through configuring iSCSI targets and storage pools.
Is the power supply redundant?
Yes, it features dual redundant 400W power supplies to ensure continuous operation even if one unit fails.
Can I expand the storage capacity later?
Yes, the server has hot-swap drive bays, meaning you can replace or add drives without powering down the system, provided the drive caddies are compatible.
What network interfaces are available?
The standard configuration includes dual Gigabit Ethernet ports, with options for 10GbE add-on cards for higher throughput.
How do I clean and maintain the server?
Use a dry, lint-free cloth to wipe the exterior. Regularly check and clean the air vents and replace the dust filters if present.
What safety certifications does the device hold?
It is certified with UL, CE, and FCC compliance, ensuring electrical safety and electromagnetic compatibility.
Where can I find replacement parts?
Replacement drives, power supplies, and fans can be sourced through Rocstor's official distributor or authorized resellers. Part numbers are listed in the user manual.
User questions about Enteroc iS1030 iSCSI Rocstor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual Enteroc iS1030 iSCSI - Rocstor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Enteroc iS1030 iSCSI by Rocstor.