Z55 - Headphones SAMSON - Free user manual and instructions
Find the device manual for free Z55 SAMSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Closed-back dynamic over-ear headphones |
| Brand | Samson |
| Model | Z55 |
| Driver Diameter | 55 mm |
| Impedance | 70 ohms |
| Sensitivity | 108 dB |
| Frequency Response | 5 Hz - 30 kHz |
| Maximum Input Power | 1000 mW |
| Cable Length | 3 m detachable cable |
| Connector | 3.5 mm stereo with 1/4-inch adapter |
| Ear Cushion | Memory foam with protein leather |
| Headband | Padded headband with stainless steel yoke |
| Passive Noise Isolation | Yes, closed-back design |
| Detachable Cable | Yes, locking connector on both earcups |
| Replaceable Earpads | Yes |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Recommendation | Set volume at moderate levels to prevent hearing loss. |
| Spare Parts | Earpads, cables and headband replacement available via Samson support. |
| General Information | Includes user manual and 1/4-inch adapter. |
Frequently Asked Questions - Z55 SAMSON
How do I connect the Samson Z55 to my smartphone or laptop?
Use the detachable 3.5 mm cable. For devices with a 6.35 mm output, attach the included 1/4-inch adapter. Plug the cable into the left earcup until it clicks into place.
Can I replace the ear cushions on the Z55?
Yes. The ear cushions are replaceable. Gently pull them off the housing and snap the new ones on. Ensure they are oriented correctly.
What is the frequency response of the Z55?
The Samson Z55 reproduces frequencies from 5 Hz to 30 kHz, providing deep bass and clear highs across the audio spectrum.
Do I need an external headphone amplifier to drive the Z55?
With a 70 ohm impedance and 108 dB sensitivity, the Z55 works well with most smartphones, laptops and audio interfaces. An external amplifier can further improve dynamics and headroom.
How should I clean and maintain the Z55 headphones?
Wipe the ear cushions and headband with a soft, dry cloth. Avoid using water, cleaning agents or solvents. For stubborn dirt, slightly dampen the cloth and let the parts air-dry.
Does the Z55 have active noise cancellation?
No. The Z55 uses a closed-back passive noise isolation design. The sealed ear cups block a significant amount of ambient noise without the need for batteries.
Are the cables on the Z55 detachable?
Yes, the cable is detachable on both ends. The earcup connectors have a locking mechanism to ensure a secure fit. Spare cables are available.
What is the maximum power handling of the Z55?
The Z55 can handle up to 1000 mW of input power, making it suitable for high-output studio monitoring.
How should I store the Z55 when not in use?
Store the headphones on a headphone stand or flat in a padded case. Avoid folding or placing heavy items on them. Keep the cable coiled loosely.
Is the Samson Z55 suitable for professional studio monitoring?
Yes. The 55 mm drivers deliver accurate sound reproduction with a wide frequency range. The closed-back design prevents sound leakage, ideal for tracking vocals and instruments.
User questions about Z55 SAMSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual Z55 - SAMSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Z55 by SAMSON.