Rumble AF80 - Headphones MEE audio - Free user manual and instructions
Find the device manual for free Rumble AF80 MEE audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Over-Ear Headphones |
| Brand | MEE audio |
| Model | Rumble AF80 |
| Color | Black |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 10 meters |
| Battery Life | Up to 30 hours of playback |
| Charging Time | Approximately 2 hours |
| Charging Port | USB-C |
| Driver Size | 40 mm dynamic drivers |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 32 ohms |
| Weight | 250 grams |
| Dimensions (H × W × D) | 180 × 160 × 80 mm |
| Microphone | Built-in with echo cancellation |
| Controls | On-ear buttons for music, calls, and voice assistant |
| Foldable Design | Yes, for easy portability |
| Included Accessories | USB-C charging cable, 3.5 mm audio cable, user manual |
| Noise Isolation | Passive noise isolation with plush ear cushions |
| Bass Enhancement | Rumble technology for deep, enhanced bass |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - Rumble AF80 MEE audio
How do I pair the Rumble AF80 with my smartphone?
Turn on the headphones and put them in pairing mode by pressing and holding the power button for 5 seconds until the LED flashes red and blue. Then, go to your phone's Bluetooth settings and select MEE audio Rumble AF80 to connect.
How long does the battery take to charge fully?
The battery takes approximately 2 hours to charge completely via the included USB-C cable. A full charge provides up to 30 hours of playback time.
Can I use the headphones while they are charging?
Yes, you can use the headphones in wired mode via the included 3.5 mm audio cable while charging, but wireless playback during charging may not be supported.
How do I clean the Rumble AF80 headphones?
Wipe the exterior with a soft, dry cloth. For the ear cushions, gently brush off dirt or use a slightly damp cloth. Avoid using harsh chemicals or submerging the headphones in water.
Are the ear cushions replaceable?
Yes, the ear cushions are replaceable. Please contact MEE audio support or visit their website to purchase official replacement cushions for the Rumble AF80.
How do I reset the headphones if they stop working?
To reset, turn off the headphones and then press and hold the power button for 10 seconds. This will clear the pairing memory. Then pair again with your device.
Can I connect the Rumble AF80 to two devices at once?
No, the Rumble AF80 supports single-device connection at a time. You can switch devices by disconnecting from the current one and pairing to the next.
What is the wireless range of the headphones?
The Bluetooth range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the effective range.
How do I adjust the volume and skip tracks?
Use the on-ear controls: press the + button to increase volume, − to decrease, and press and hold the + or − button to skip to the next or previous track.
What should I do if the headphones do not turn on?
First, charge the headphones for at least 30 minutes. If they still do not turn on, try a different cable or charger. If the problem persists, contact MEE audio support for further assistance.
User questions about Rumble AF80 MEE audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual Rumble AF80 - MEE audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Rumble AF80 by MEE audio.