VT-81001 - Motion detector V-TAC - Free user manual and instructions
Find the device manual for free VT-81001 V-TAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Infrared (PIR) Motion Detector |
| Brand | V-TAC |
| Model | VT-81001 |
| Detection Technology | Infrared (PIR) sensor |
| Detection Range | Up to 12 meters |
| Detection Angle | 120 degrees |
| Adjustable Detection Sensitivity | Yes |
| Light Sensitivity (Lux) | Adjustable, 10 to 2000 lux |
| Time Delay Adjustment | 10 seconds to 10 minutes |
| Power Supply | 220-240V AC, 50/60Hz |
| Maximum Load (Resistive) | 1200W |
| Maximum Load (LED) | 300W |
| Mounting Type | Wall or ceiling mounting |
| Protection Rating | IP44 (splashproof) |
| Operating Temperature | -20°C to +40°C |
| Dimensions (approx.) | 90 x 90 x 90 mm |
| Weight (approx.) | 150 g |
| Color | White |
| Certification | CE, RoHS |
| Package Contents | 1x Motion Detector, 1x Mounting Kit, 1x User Manual |
| Warranty | 2 years |
Frequently Asked Questions - VT-81001 V-TAC
What is the detection range of the V-TAC VT-81001 motion detector?
The detection range is up to 12 meters with a detection angle of 120 degrees, covering a wide area for reliable motion sensing.
Can this motion detector be used outdoors?
Yes, the VT-81001 has an IP44 protection rating, making it splashproof and suitable for outdoor mounting under eaves or similar sheltered locations.
How do I adjust the time delay?
The time delay is adjustable via a rotary knob on the unit. Turn it to set the period from 10 seconds to 10 minutes for how long the connected light stays on after motion is detected.
What types of lamps are supported?
It supports up to 1200W of incandescent bulbs or up to 300W of LED bulbs, so you can connect standard household lighting without issues.
How does the light sensitivity (lux) adjustment work?
The lux control sets the ambient brightness threshold. At higher lux settings, the detector only activates in darkness; at lower settings, it can activate even in daylight.
Can I install it myself?
If you are experienced with electrical wiring, you can install it, but we strongly recommend having a qualified electrician perform the installation for safety and compliance with local regulations.
Why does the light stay on continuously?
This usually happens if the time delay is set too long, the lux setting is too high, or the sensor is facing moving objects (like trees). Check the settings and reposition the detector if needed.
How should I clean the motion detector?
Use a soft dry cloth to wipe the surface. Avoid water, solvents, or abrasive cleaners, as they may damage the sensor lens or the housing.
What is the power supply requirement?
It operates on standard household power: 220-240V AC, 50/60Hz. Make sure the wiring is properly connected before switching on.
What warranty does V-TAC offer for this product?
V-TAC provides a 2-year warranty covering manufacturing defects. Keep your receipt and contact your point of purchase if you encounter any issues.
User questions about VT-81001 V-TAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual VT-81001 - V-TAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-81001 by V-TAC.
USER MANUAL VT-81001 V-TAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : V-TAC
Model : VT-81001
Category : Motion detector