VT-81007 - Motion detector V-TAC - Free user manual and instructions
Find the device manual for free VT-81007 V-TAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | V-TAC |
| Model | VT-81007 |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters / 39 ft |
| Detection Angle | 120 degrees |
| Power Supply | 220-240V AC, 50Hz |
| Maximum Load | 1200W (incandescent) / 300W (LED) |
| Mounting Type | Wall or ceiling mounted |
| Time Delay | Adjustable: 10 seconds - 12 minutes |
| Light Sensitivity | Adjustable (LUX) |
| Ambient Light Threshold | Adjustable via LUX control |
| Dimensions (H x W x D) | 95 x 95 x 65 mm (approx) |
| Weight | 120 g (approx) |
| IP Rating | IP20 (indoor use) |
| Operating Temperature | -20°C to +45°C |
| Installation Wiring | 2-wire connection (L and N) |
| Certifications | CE, RoHS |
| Housing Material | ABS plastic |
| Color | White |
| Maintenance | Clean with a dry cloth; do not use water or solvents |
| Safety Precautions | Disconnect power before installation |
| Spare Parts Availability | Not provided; replace unit if defective |
| Repairability | Not serviceable; sealed casing |
| Usage Location | Indoor use only |
Frequently Asked Questions - VT-81007 V-TAC
How do I install the V-TAC VT-81007 motion detector?
Turn off the power supply. Connect the live wire to terminal L and the neutral wire to terminal N. Mount the detector at a height of 2 to 4 meters for optimal coverage. Restore power after installation.
What is the detection range of the VT-81007?
The VT-81007 has a detection range of up to 12 meters and a detection angle of 120 degrees. It uses PIR technology to detect body heat.
Can the motion detector be used outdoors?
No, this model has an IP20 rating, meaning it is only suitable for indoor use. It is not waterproof and should be installed in dry locations.
How do I adjust the time delay and light sensitivity?
The detector has two knobs: TIME adjusts the time delay from 10 seconds to 12 minutes, and LUX sets the light sensitivity threshold. Use the LUX knob to allow the sensor to operate only in darkness or daylight.
Why does my light stay on constantly?
This may be due to a high LUX setting or the TIME delay being too long. Also check that the sensor is not facing a heat source or moving objects. Lower the LUX knob and reduce the TIME delay.
Can I use LED bulbs with this motion detector?
Yes, but the maximum load is 300W for LED lighting. Do not exceed this to prevent damage. For incandescent bulbs, the maximum load is 1200W.
What maintenance does the VT-81007 require?
Periodically clean the lens with a dry cloth to ensure accurate detection. Do not use water or chemical cleaners, as they may damage the PIR sensor.
Is the VT-81007 repairable or are spare parts available?
The unit is sealed and not user-serviceable. Spare parts are not distributed. If the device fails, replace the entire unit.
What height is best for mounting the motion detector?
Mount the sensor at a height of 2 to 4 meters above the floor. For wall mounting, angle it downward to cover the desired area. Avoid mounting near heat sources or air vents.
Does the VT-81007 require a neutral wire?
Yes, it uses a 2-wire connection requiring both live and neutral wires. Ensure your wiring setup includes a neutral conductor.
User questions about VT-81007 V-TAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual VT-81007 - V-TAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-81007 by V-TAC.
USER MANUAL VT-81007 V-TAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : V-TAC
Model : VT-81007
Category : Motion detector