FD8371V - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free FD8371V Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Brand | Vivotek |
| Model | FD8371V |
| Resolution | 2 Megapixel (1920 x 1080) |
| Lens | Fixed 2.8 mm |
| Field of View | Approx. 90 degrees horizontal |
| Minimum Illumination | 0.01 lux / F1.6 (color), IR enabled in B&W |
| Night Vision | Built-in IR LEDs, range up to 15 meters |
| Video Compression | H.264 and MJPEG |
| Network Interface | 10/100 Base-T Ethernet (RJ-45) |
| Power Supply | 12V DC or Power over Ethernet (PoE 802.3af) |
| Power Consumption | Max 8.5 W |
| Dimensions | 141 mm x 103 mm |
| Weight | 520 g |
| Housing | Vandal-proof aluminum and plastic dome |
| Ingress Protection | IP66 rated |
| Operating Temperature | -15°C to 50°C (5°F to 122°F) |
| Motion Detection | Built-in smart motion detection |
| Two-way Audio | Supported, with built-in microphone and output |
| Storage | MicroSD/SDHC/SDXC card slot for local recording |
| Security | Multi-user access levels, password protection, SSL encryption |
| Maintenance | Clean the dome with a soft, dry cloth; avoid abrasive cleaners |
| Repair | Replaceable parts are limited; repairs should be performed by qualified technicians |
| Package Contents | Camera, mounting bracket, screw kit, quick start guide, software CD |
Frequently Asked Questions - FD8371V Vivotek
How do I reset the Vivotek FD8371V to factory defaults?
Press and hold the reset button on the camera for about 10 seconds using a pointed object. The camera will reboot with default settings, including the default IP address and administrator credentials.
How do I install the FD8371V camera?
Mount the camera using the included mounting bracket. Connect the Ethernet cable and optionally the power cable. Use the installation wizard in the software or access the camera via web browser to complete the setup.
How can I access the camera remotely?
To access the camera from outside your local network, enable port forwarding on your router or set up a DDNS service. Then connect using the WAN IP address and the camera's HTTP (or HTTPS) port.
What is the default IP address of the Vivotek FD8371V?
The default IP address is 192.168.0.100. You can also use the Vivotek Installation Wizard to discover the camera on your network if it has been changed.
Does the FD8371V support Power over Ethernet?
Yes, the camera supports PoE IEEE 802.3af, which allows you to power it through the Ethernet cable from a PoE switch or injector.
Can I use this camera outdoors?
The FD8371V has an IP66 rating, meaning it is dust-tight and protected against powerful water jets. It is suitable for outdoor use within the specified temperature range.
How do I update the firmware?
Download the latest firmware from the Vivotek support website. Enter the camera's web interface, go to System > Firmware Upgrade, and upload the file. The camera will reboot after the upgrade.
What is the maximum resolution and frame rate?
The camera provides 1920 x 1080 resolution (2 Megapixel) at 30 fps for smooth H.264 video streams.
How do I set up motion detection zones?
In the camera's web interface, go to Events > Motion Detection. You can define up to 3 windows, adjust sensitivity and threshold, and set actions like recording or sending email alerts.
Does the camera support audio?
Yes, the FD8371V has a built-in microphone and an external audio output, enabling two-way audio for listening and talking through the camera.
User questions about FD8371V Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FD8371V - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD8371V by Vivotek.