IP8365H - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free IP8365H Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (Network IP Camera) |
| Brand | Vivotek |
| Model | IP8365H |
| Image Sensor | 1/2.7" CMOS Progressive |
| Max Resolution | 1920 x 1080 (2 Megapixels) |
| Lens | Fixed 3.6mm F1.8 |
| Field of View | 72° horizontal angle |
| Day/Night Mode | True with removable IR-cut filter |
| Infrared Range | 30m |
| Video Compression | H.264 & MJPEG |
| Audio Input | 1 channel (external microphone) |
| Network Interface | 10/100 Ethernet RJ-45 |
| Power Supply | PoE IEEE 802.3af (Class 3) |
| Power Consumption | 5.5W max |
| Dimensions (Ø x L) | 70mm x 57mm |
| Weight | 250g |
| Weatherproof Rating | IP66 |
| Operating Temperature | -20°C ~ 50°C |
| Storage | MicroSD/SDHC slot (up to 64GB) |
| Security Features | Password protection, IP filtering, HTTPS |
| Maintenance | Clean lens with soft dry cloth; check cable connections |
| Spare Parts / Reparability | Modular design; replacement lens, IR board, and main board available |
Frequently Asked Questions - IP8365H Vivotek
How to reset the camera to factory defaults?
Press and hold the reset button for 10 seconds while the camera is powered on. The camera will reboot with default settings.
How to access the camera remotely?
Use the VIVOTEK DDNS service or configure port forwarding on your router. Ensure the camera has a static IP address.
What is the default username and password?
The default login is admin with no password. It is strongly recommended to set a password during initial setup.
How to record video to an SD card?
Insert a MicroSD card (up to 64GB) into the slot, then enable recording in the camera's web interface under Storage settings.
Can the camera be used outdoors?
Yes, the IP8365H features an IP66-rated housing, making it suitable for outdoor installation.
How to update the firmware?
Download the latest firmware from VIVOTEK's website, then upload it via the web interface under Maintenance > Firmware Upgrade.
How to configure motion detection?
In the web interface, go to Configuration > Event > Motion Detection, enable it, and define detection windows and sensitivity.
What should I do if the camera goes offline?
Check the network connection, power supply, and PoE switch. Try rebooting the camera. If the problem persists, perform a factory reset.
How to set up night vision?
The camera automatically switches to night mode based on ambient light. Ensure the IR-cut filter is enabled in settings.
Does the camera support PoE?
Yes, it supports IEEE 802.3af Power over Ethernet, allowing both power and data over a single cable.
User questions about IP8365H Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual IP8365H - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IP8365H by Vivotek.
USER MANUAL IP8365H Vivotek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivotek
Model : IP8365H
Category : Security Camera