TJD90 - Cutting machine Tryton - Free user manual and instructions
Find the device manual for free TJD90 Tryton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Manual tile cutting machine |
| Brand | Tryton |
| Model | TJD90 |
| Cutting length | 90 cm |
| Max tile thickness | 12 mm |
| Cutting wheel | Tungsten carbide disc |
| Cutting angles | 90° straight cuts and 45° bevel cuts |
| Base material | Aluminum profile |
| Guide rail | Ball bearing guide rail |
| Measurement scale | Centimeters and inches |
| Breaking system | Adjustable breaking bar |
| Handle | Ergonomic soft grip handle |
| Rubber feet | Anti-slip pads |
| Overall dimensions | Approx. 100 × 30 × 20 cm |
| Weight | Approx. 12 kg |
| Power source | Manual, no electricity required |
| Maintenance | Clean the rail and cutting wheel regularly |
| Safety features | Stable base and non-slip handle |
| Spare parts availability | Replacement cutting wheels and guides available |
| Package contents | Tile cutter, instruction manual |
| Repairability | Modular components for easy repair |
Frequently Asked Questions - TJD90 Tryton
How do I cut a ceramic tile with the Tryton TJD90?
Place the tile on the base, align the cutting wheel with the marked line, and pull the handle toward you with consistent pressure. Then press down on the breaking bar to snap the tile along the score. Ensure the cutting wheel is sharp for a clean cut.
What is the maximum cutting thickness of the TJD90?
The TJD90 can cut tiles up to 12 mm thick. For thicker materials, the cutting wheel may not score deeply enough for a clean break.
Can the TJD90 cut porcelain tiles?
Yes, the TJD90 is suitable for cutting ceramic, porcelain, and stone tiles. Use a steady motion and do not force the handle to avoid damaging the cutting wheel.
How do I replace the cutting wheel?
Loosen the retaining screw on the cutting head, remove the worn wheel, and fit a new one. Check the alignment before tightening. Always use a tungsten carbide wheel for optimal performance.
How do I make a 45-degree bevel cut with the TJD90?
Adjust the cutting head to the 45° setting using the angle stop. Score the tile as usual, then carefully break the edge. Practice on scrap tiles to ensure accuracy.
How should I maintain the tile cutter?
After each use, wipe the rail clean and apply a light oil to prevent rust. Remove debris from the base and periodically check the cutting wheel for wear. Replace it if it becomes dull or chipped.
What safety precautions should I take when using this machine?
Always wear safety glasses and gloves. Do not reach under the cutting head while scoring. Place the cutter on a stable surface and keep children away from the working area.
The cutting wheel is not scoring straight. What could be wrong?
Check that the guide rail is clean and lubricated. Ensure the cutting wheel is tight and not worn. Also verify that the tile is fully flat on the base and the wheel is aligned with the measuring scale.
Does the TJD90 require electricity?
No, it is a manual tile cutter. It operates with a simple pull of the handle, making it ideal for on-site work without power access.
Is it easy to store the TJD90?
Yes, the compact aluminum frame allows it to be stored upright or flat. It weighs about 12 kg and can be transported easily. Clean it before storage to prevent corrosion.
User questions about TJD90 Tryton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cutting machine in PDF format for free! Find your manual TJD90 - Tryton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TJD90 by Tryton.
USER MANUAL TJD90 Tryton
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tryton
Model : TJD90
Category : Cutting machine