MODBUS-110 - Inverter Bxterra - Free user manual and instructions
Find the device manual for free MODBUS-110 Bxterra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inverter (Onduleur) |
| Brand | Bxterra |
| Model | MODBUS-110 |
| DC Input Voltage | 24V DC nominal (20V-30V range) |
| AC Output Voltage | 110V AC, 60Hz pure sine wave |
| Continuous Power | 1100W |
| Peak Power | 2200W |
| Output Waveform | Pure sine wave |
| Efficiency | Up to 92% |
| Communication | Modbus RTU via RS485 |
| Display | LED indicators for power, fault, and overload |
| Cooling | Intelligent thermostatically-controlled fan |
| Protections | Overload, short circuit, over-temperature, reverse polarity, undervoltage |
| Remote Control | Supports external monitoring via Modbus |
| Dimensions (W x H x D) | 330 x 180 x 90 mm |
| Net Weight | 4.5 kg |
| Operating Temperature | -10°C to +50°C |
| Enclosure Material | Aluminum alloy |
| Certifications | CE, RoHS |
| Spare Parts & Repairability | Modular design; easily replaceable fan and internal fuses |
| Maintenance | Keep vents dust-free; tighten connections every 3 months |
| General Information | Designed for residential and mobile solar power systems |
Frequently Asked Questions - MODBUS-110 Bxterra
What is the input voltage for the Bxterra MODBUS-110?
The inverter accepts a nominal 24V DC input, with a working range of 20V to 30V DC. Make sure your battery bank meets this requirement.
Can the MODBUS-110 output 220V or 240V?
No, this model provides a pure sine wave output at 110V AC. For 220V applications, please check our other models.
How do I monitor the inverter remotely?
The inverter supports Modbus RTU over RS485, allowing integration with most solar monitoring systems. You can also use a USB-RS485 adapter to connect to a computer or Raspberry Pi.
What protections does the inverter offer?
It includes protection against overload, short circuits, over-temperature, reverse polarity, and input undervoltage. These safeguards help prevent damage to both the inverter and connected devices.
What is the recommended battery capacity for a 1100W load?
For a 1100W continuous load, we recommend a battery bank with at least 100Ah at 24V to maintain a reasonable runtime of about 2 hours.
Can this inverter be used with solar panels directly?
The MODBUS-110 is designed for solar systems with a charge controller or MPPT. Do not connect solar panels directly to the inverter; use a battery bank or MPPT controller in between.
How do I set the Modbus address?
The Modbus address is set via switches on the front panel. Refer to the manual to select addresses 1 to 247. Default is 1.
What kind of maintenance does the inverter require?
Periodically clean the ventilation grilles to prevent dust accumulation. Inspect cable connections every 3 months and ensure the fans are operational. No other routine maintenance is required.
Is the MODBUS-110 quiet during operation?
The cooling fan is temperature-controlled and runs at low speed under light loads. At full load, the fan may become audible but remains below 50 dB.
How long is the warranty and what does it cover?
The inverter comes with a 2-year warranty covering manufacturing defects and workmanship. Spare parts such as fans and fuses are available for purchase separately.
User questions about MODBUS-110 Bxterra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual MODBUS-110 - Bxterra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MODBUS-110 by Bxterra.
USER MANUAL MODBUS-110 Bxterra
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bxterra
Model : MODBUS-110
Category : Inverter