SP1000LCDRT2U - Inverter Bxterra - Free user manual and instructions
Find the device manual for free SP1000LCDRT2U Bxterra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line-Interactive UPS (Inverter) |
| Brand | Bxterra |
| Model | SP1000LCDRT2U |
| Rated Power | 1000 VA / 600 W |
| Input Voltage Range | 160-290 VAC |
| Output Voltage | 230 VAC |
| Waveform | Simulated sine wave |
| Transfer Time | 2-6 ms |
| Automatic Voltage Regulation (AVR) | Yes |
| Battery Type | Sealed lead-acid (AGM) |
| Battery Capacity | 12 V / 9 Ah |
| Battery Replacement | User-replaceable with standard connectors |
| Recharge Time | 6-8 hours (to 90%) |
| LCD Display | Yes (load level, battery status, input/output voltage) |
| Communication | USB port with monitoring software |
| Protection | Overload, short circuit, and surge protection |
| Outlets | 4 IEC 320 C13 sockets |
| Mounting | Rackmount 2U (tower conversion optional) |
| Dimensions (W x D x H) | 483 x 400 x 89 mm |
| Weight | 14.5 kg |
| Operating Temperature | 0-40 °C |
| Noise Level | < 45 dB |
| Maintenance | Clean exterior with dry cloth; ensure proper ventilation |
| Repairability | Battery and fans are user-replaceable |
Frequently Asked Questions - SP1000LCDRT2U Bxterra
What does the LCD display show?
The LCD shows input/output voltage, battery status, and load level to help you monitor UPS health.
How often should I replace the battery?
Typically every 2-3 years, depending on usage frequency and operating temperature. The UPS uses a standard 12 V / 9 Ah AGM battery that can be replaced without tools.
Can I connect a laser printer to the UPS?
No, laser printers have high peak power consumption and may overload the UPS. Only connect devices like computers, monitors, and network equipment.
How long does the battery last during a power outage?
At full load (600 W), runtime is about 5 minutes; at half load, around 15 minutes. Actual runtime depends on the efficiency of connected devices.
What is AVR and how does it help?
AVR (Automatic Voltage Regulation) stabilizes the output voltage without switching to battery, protecting equipment from voltage fluctuations and extending battery life.
How do I connect the UPS to my computer?
Use the built-in USB port to connect to your PC. Install the provided monitoring software to enable automatic shutdown and status monitoring.
Why does the UPS beep continuously?
Continuous beeping usually indicates battery failure or overload. Check the load level and perform a battery test from the control panel.
Can the UPS be mounted in a rack?
Yes, it is designed for 2U rack mounting with mounting ears included. It can also be placed as a tower on a flat surface.
What maintenance is required?
Regularly dust the exterior with a dry cloth and keep the vents clear. Check battery terminals for corrosion. Ensure the UPS is placed in a well-ventilated area.
Does the UPS protect against lightning surges?
It has built-in surge protection for both power input and Ethernet/phone lines, providing basic protection against lightning-induced surges.
User questions about SP1000LCDRT2U Bxterra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual SP1000LCDRT2U - Bxterra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP1000LCDRT2U by Bxterra.
USER MANUAL SP1000LCDRT2U Bxterra
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bxterra
Model : SP1000LCDRT2U
Category : Inverter