Bullet IB836BA-EHT - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free Bullet IB836BA-EHT Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Bullet Network Security Camera |
| Brand | Vivotek |
| Model | IB836BA-EHT |
| Image Sensor | 1/2.8-inch Progressive CMOS |
| Maximum Resolution | 2 Megapixels (1920 x 1080) |
| Lens Type | Fixed focal lens, 3.6mm |
| Viewing Angle | Approximately 90° horizontal |
| IR Distance | Up to 30 m (100 ft) with Smart IR |
| Weatherproof Rating | IP66-rated metal housing |
| Power Supply | IEEE 802.3af PoE or 12V DC |
| Network Interface | 10/100 Mbps Ethernet (RJ-45) |
| Video Compression | H.265, H.264, MJPEG |
| Storage | MicroSD/SDHC/SDXC card slot (up to 512GB) |
| Motion Detection | Built-in smart motion detection with alerts |
| Wide Dynamic Range | 120dB WDR for high-contrast scenes |
| Dimensions (L x Ø) | Approx. 200 mm x 70 mm (7.9" x 2.8") |
| Weight | Approx. 900 g (1.98 lbs) |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Mounting Bracket | Included pivot mount with cable management |
| Remote Monitoring | Supports ONVIF, RTSP, and VIVOTEK apps |
Frequently Asked Questions - Bullet IB836BA-EHT Vivotek
How do I factory reset the Vivotek IB836BA-EHT?
Press and hold the reset button on the side of the camera for about 10 seconds while powering it on. The camera will reboot and restore factory defaults. For a hard reset, disconnect power, press the reset button, reconnect power, and wait for the status LED to blink before releasing.
What is the recommended installation method for the bullet camera?
Use the included mounting bracket and template to mark drill holes. Mount the bracket to a wall or ceiling using the supplied screws and anchors. Adjust the camera head to the desired angle and tighten the locking joints. Ensure the cable is routed through the bracket to maintain a weatherproof seal.
Can the IB836BA-EHT be powered via PoE?
Yes, the camera supports IEEE 802.3af Power over Ethernet, allowing both network data and power to be transmitted over a standard Ethernet cable. Use a PoE switch or a PoE injector with a power output of at least 12.95W.
How do I access the camera remotely?
Connect the camera to your network and use VIVOTEK's app or a web browser to access the IP address. For remote access from the internet, configure port forwarding on your router or use VIVOTEK's cloud service (VIVOTEK Cloud) for simple setup.
How do I set up motion detection alerts?
Log in to the camera's web interface, go to Configuration > Motion Detection, and enable motion windows on the live image. Then set up event triggers and enable email or HTTP notifications. You can also schedule actions like recording or alarm output.
What is the recommended storage option for continuous recording?
For reliable storage, insert a high-endurance microSD card (up to 512GB) inside the camera for edge recording. For larger archives, use a NAS or VMS system with NFS or SMB shares. The camera also supports VIVOTEK's own VSS software.
How can I update the camera's firmware?
Download the latest firmware from the VIVOTEK website. Access the camera's web interface, go to Administration > Firmware Upgrade, and upload the downloaded file. Do not power off during the upgrade. The camera will reboot automatically when finished.
Is this camera compatible with third-party surveillance software?
Yes, the IB836BA-EHT supports ONVIF Profile S, RTSP, and standard HTTP APIs. This means it can be integrated with popular VMS platforms like Milestone, Genetec, Blue Iris, and many others.
How do I clean the camera lens and housing?
Use a soft microfibre cloth slightly dampened with water or a mild soap solution. Gently wipe the dome and lens. For the housing, avoid harsh chemicals. Never use abrasive cleaners or high-pressure air, and always power off the camera before cleaning.
What security measures should I take to protect the camera from hacking?
Immediately change the default administrator password, use a strong unique password, enable 2FA if supported, keep firmware updated, disable unused ports and services, and place the camera on a secure VLAN. Also use high-quality HTTPS encryption to prevent eavesdropping.
User questions about Bullet IB836BA-EHT Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Bullet IB836BA-EHT - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bullet IB836BA-EHT by Vivotek.
USER MANUAL Bullet IB836BA-EHT Vivotek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivotek
Model : Bullet IB836BA-EHT
Category : Security Camera