SPS-615 - Loudspeaker Sven - Free user manual and instructions
Find the device manual for free SPS-615 Sven in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Device type | Active speaker system 2.1 |
| Brand | Sven |
| Model | SPS-615 |
| Number of channels | 2.1 (subwoofer and two satellites) |
| Total power | 30 W (RMS) |
| Frequency range | 20 Hz - 20 kHz |
| Signal-to-noise ratio | ≥ 75 dB |
| Inputs | 3.5 mm mini-jack, RCA |
| Controls | Volume control, power switch |
| Power supply | AC 220 V, 50 Hz |
| Satellite dimensions | 120 x 200 x 150 mm |
| Subwoofer dimensions | 200 x 300 x 250 mm |
| Weight | 3.5 kg |
| Cabinet material | MDF (subwoofer), plastic (satellites) |
| Additional functions | LED power indicator |
| Package contents | Subwoofer, 2 satellites, audio cable, manual |
| Care and cleaning | Disconnect from mains, wipe with a soft dry cloth |
| Safety precautions | Do not open the case, keep away from moisture, do not place heavy objects |
| Repairability | Fuse replacement is possible; in case of malfunction, contact a service center |
Frequently Asked Questions - SPS-615 Sven
How to connect the Sven SPS-615 speaker to a computer?
To connect, use a cable with a 3.5 mm mini-jack connector. Insert it into the output on the computer's sound card, and the other end into the input on the back panel of the subwoofer. Then plug the speaker into the mains and adjust the volume on the case.
What to do if the speakers produce no sound?
Check that the speaker is turned on and the power indicator is lit. Make sure the connection cable is inserted securely. Check the volume level both on the computer and on the speaker itself. Also ensure that the correct output device is selected in the system settings.
How to properly clean the speakers?
Before cleaning, disconnect the speaker from the power mains. Use a soft dry cloth to remove dust. Do not use aggressive chemical agents and do not allow moisture to enter the case.
Can the speaker be used outdoors?
This model is not waterproof. Outdoor use is possible only in dry weather, with no risk of moisture or dust ingress. Store it indoors.
What is the power of the Sven SPS-615 speaker?
The total output power is 30 W RMS. This provides sufficient volume for a small room or office.
Can a microphone be connected to the speaker?
The speaker has no microphone input. The device is designed only for playing audio from a computer, phone, or player.
Why do the speakers produce hum or background noise?
The hum can be caused by a low-quality cable, interference from nearby electrical appliances, or incorrect grounding. Try using a different cable and placing the speakers away from sources of electromagnetic fields.
How to repair the speaker if it breaks down?
If there is a malfunction, do not disassemble the speaker yourself. Contact an authorized service center. If the fuse is blown, you can replace it, but this requires opening the case - it is better to entrust this to a specialist.
What safety precautions should be observed?
Do not open the device case, do not use it in damp rooms or with voltage fluctuations. Place the speaker on a stable surface to avoid falling.
Can the satellites be replaced with other speakers?
Technically possible, but not recommended, as the output power and impedance may not match. This can lead to overloading the amplifier. It is better to use only the original satellites.
User questions about SPS-615 Sven
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SPS-615 - Sven and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPS-615 by Sven.