How to properly charge the Sven PS-330 and how to perform a factory reset?

Q: How to properly charge the Sven PS-330 and how to perform a factory reset?

Slow charging of the Sven PS-330: If your speaker is charging slowly, first check that you are using the original USB adapter provided with the device. Incomplete or too fast charging can damage the battery. Connect the USB cable to the DC 5V port located on the device and to a compatible power adapter. Full charging takes about 2 hours. The device turns off after one minute: This behavior generally indicates a low battery or a defective battery. Before proceeding with a reset, first perform a full charge (minimum 2 hours) by leaving the device connected to the charging cable. Factory reset: To perform a forced reset of the Sven PS-330, press and hold the Power button for at least 10 seconds until the device completely restarts. This resets the internal electronics without affecting the battery data. After the reset: If the device continues to turn off after the reset and a full charge, there is likely a problem with the battery or internal electronics. In this case, we recommend contacting Sven technical support or claiming your warranty.

Question

Accepted Answer

Slow charging of the Sven PS-330: If your speaker is charging slowly, first check that you are using the original USB adapter provided with the device. Incomplete or too fast charging can damage the battery. Connect the USB cable to the DC 5V port located on the device and to a compatible power adapter. Full charging takes about 2 hours.

The device turns off after one minute: This behavior generally indicates a low battery or a defective battery. Before proceeding with a reset, first perform a full charge (minimum 2 hours) by leaving the device connected to the charging cable.

Factory reset: To perform a forced reset of the Sven PS-330, press and hold the Power button for at least 10 seconds until the device completely restarts. This resets the internal electronics without affecting the battery data.

After the reset: If the device continues to turn off after the reset and a full charge, there is likely a problem with the battery or internal electronics. In this case, we recommend contacting Sven technical support or claiming your warranty.

User manual Sven : user manuals and guides in PDF

Models Sven most viewed

Browse manuals Sven by appliance type

Recent questions about devices Sven