SPS-830 - Speaker Sven - Free user manual and instructions
Find the device manual for free SPS-830 Sven in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Model | SPS-830 |
| Brand | Sven |
| Dimensions (W x H x D) | 200 x 100 x 100 mm |
| Weight | 0.8 kg |
| Power Source | Built-in rechargeable battery (2000 mAh) |
| Charging Time | Approx. 3 hours |
| Playback Time | Up to 10 hours (at medium volume) |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 m |
| Audio Inputs | Bluetooth, AUX 3.5 mm |
| Frequency Response | 80 Hz - 20 kHz |
| Speaker Power | 2 x 5 W |
| Controls | Power, Volume Up/Down, Play/Pause, Bluetooth pairing button |
| Water Resistance | IPX5 (splash proof) |
| Included Accessories | Micro USB charging cable, AUX cable, user manual |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use abrasive or liquid cleaners |
| Safety Precautions | Do not expose to extreme temperatures, keep away from water, do not disassemble |
| Repairability | Battery replacement by qualified service center only |
Frequently Asked Questions - SPS-830 Sven
How do I turn on the Sven SPS-830 speaker?
Press and hold the Power button for about 2 seconds until you hear a sound or see the LED indicator.
How do I pair my phone with the speaker via Bluetooth?
Turn on the speaker, it will enter pairing mode automatically. On your phone, enable Bluetooth and select 'Sven SPS-830' from the list. If prompted, enter 0000 as the PIN.
Can I use the speaker while it is charging?
Yes, you can listen to music while the speaker is connected to a power source via the Micro USB cable.
How long does it take to fully charge the battery?
Charging takes approximately 3 hours when using a standard 5V/1A charger.
What does the LED indicator mean?
Solid blue: Bluetooth connected. Flashing blue: pairing mode. Red: charging. Off: powered off.
How do I connect the speaker to a non-Bluetooth device?
Use the included AUX cable. Plug one end into the speaker's AUX input and the other into your device. The speaker will automatically switch to line-in mode.
Why is there no sound from the speaker?
Ensure the speaker is powered on and the volume is turned up. Check that your source device is connected and playing audio. If using Bluetooth, confirm the pairing is successful.
Is the speaker waterproof?
It has an IPX5 rating, meaning it is splash proof but not fully waterproof. Avoid submerging it.
How do I reset the speaker to factory settings?
Turn off the speaker, then press and hold the Power and Volume Up buttons together for 5 seconds until the LED flashes red and blue.
What should I do if the battery does not hold a charge?
Battery performance degrades over time. If the issue persists, contact Sven support for possible battery replacement. Do not attempt to replace it yourself.
User questions about SPS-830 Sven
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual SPS-830 - Sven and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPS-830 by Sven.
USER MANUAL SPS-830 Sven
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sven
Model : SPS-830
Category : Speaker