MC-50 - Speaker Sven - Free user manual and instructions
Find the device manual for free MC-50 Sven in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker |
| Brand | Sven |
| Model | MC-50 |
| Color | Black |
| Dimensions (W x H x D) | 170 x 100 x 100 mm |
| Weight | 0.6 kg |
| Power Supply | Built-in rechargeable battery, 5V USB charging |
| Battery Capacity | 1200 mAh |
| Battery Life | Up to 6 hours |
| Connectivity | Bluetooth 5.0, AUX 3.5mm, TF card slot |
| Bluetooth Range | 10 meters |
| Output Power | 10W |
| Signal-to-Noise Ratio | ≥80 dB |
| Frequency Response | 100 Hz - 20 kHz |
| Charging Time | 2-3 hours |
| Controls | Volume +/-, Play/Pause, Next/Previous, Power |
| Waterproof Rating | IPX5 |
| Microphone | Built-in for hands-free calls |
| Package Contents | Speaker, USB cable, AUX cable, User manual |
| Material | Plastic |
Frequently Asked Questions - MC-50 Sven
How to pair the speaker via Bluetooth?
Turn on the speaker by pressing the Power button. The speaker will automatically enter pairing mode (indicated by a flashing blue light). On your device, search for Bluetooth devices and select 'Sven MC-50'. If prompted, enter 0000 as the PIN. Once connected, the light will turn solid blue.
How to charge the speaker?
Connect the provided USB cable to the charging port on the speaker and plug the other end into a USB power source (e.g., computer, wall adapter). The battery indicator will light up red during charging and turn off or green when fully charged. Full charge takes approximately 2-3 hours.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is charging. However, it is recommended to charge the battery fully before first use for optimal battery performance.
How to reset the speaker?
To reset the Sven MC-50, press and hold the Power button for about 10 seconds until the LED flashes rapidly. The speaker will turn off. Then turn it on again to complete the reset.
How to connect via AUX cable?
Insert one end of the 3.5mm AUX cable into the AUX input on the speaker and the other end into your audio source (e.g., phone, computer). The speaker will automatically switch to AUX mode. Ensure the speaker is powered on and adjust volume using the source device or speaker controls.
Why is there no sound from the speaker?
First, check that the speaker is powered on and the volume is turned up on both the speaker and your connected device. Ensure the Bluetooth connection is active or the AUX cable is firmly inserted. If the battery is low, charge the speaker. Try resetting the speaker or re-pairing if issues persist.
How to handle water damage?
Although the speaker has an IPX5 waterproof rating (splash resistant), it should not be submerged. If the speaker gets wet, immediately dry it with a soft cloth and allow it to air dry completely before using again. Do not use a hair dryer or heat source.
How to clean the speaker?
Use a soft, dry cloth to wipe the exterior. For stubborn dirt, slightly dampen the cloth with water and mild soap. Avoid getting moisture in the ports. Do not use abrasive cleaners or solvents.
What to do if the battery does not charge?
Ensure the USB cable and charging port are clean and undamaged. Try a different USB cable and power source. If the battery still does not charge, the battery may be defective. Contact Sven support for assistance.
How long does the battery last?
The Sven MC-50 has a built-in 1200 mAh battery that provides up to 6 hours of playtime at moderate volume. Actual battery life may vary based on volume level and audio content.
User questions about MC-50 Sven
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual MC-50 - Sven and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MC-50 by Sven.