DS-PI-Q200/FM - Uncategorized Hikvision - Free user manual and instructions
Find the device manual for free DS-PI-Q200/FM Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Infrared Motion Detector |
| Brand | Hikvision |
| Model | DS-PI-Q200/FM |
| Category | Security Sensor |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | 12 meters (typical) |
| Detection Angle | 90 degrees (typical) |
| Mounting Type | Flush Mount |
| Power Supply | 9 - 16 VDC (12 VDC recommended) |
| Current Consumption | 15 mA max (typical) |
| Tamper Protection | Yes (anti-opening switch) |
| Anti-Masking | Yes (lens covering detection) |
| Alarm Output | Relay (NO / NC), 24 VDC / 1A max |
| LED Indicator | Red LED for alarm and test mode |
| Pulse Count | Adjustable (1, 2 or 3 pulses) |
| Operating Temperature | -10°C to +55°C |
| Ambient Humidity | 95% relative (non-condensing) |
| Dimensions | 90 mm × 60 mm × 45 mm (typical) |
| Weight | 120 g |
| Housing Material | ABS plastic |
| Cleaning Method | Wipe with a soft, dry cloth |
| Repair and Spare Parts | No user-serviceable parts; contact support |
| Certifications | CE, FCC, RCM |
Frequently Asked Questions - DS-PI-Q200/FM Hikvision
What is the detection range of the Hikvision DS-PI-Q200/FM?
The typical detection range is 12 meters with a 90° viewing angle. For best performance, install the detector at a height of 2.2 to 2.5 meters.
How do I install the DS-PI-Q200/FM motion detector?
Mount the detector on a solid wall or corner using the supplied screws. The recommended height is 2.2 to 2.5 meters. Avoid pointing it directly at windows, heat sources, or moving objects like curtains to minimize false alarms.
What power supply does the DS-PI-Q200/FM need?
The detector requires a DC supply of 9 to 16 VDC, with a typical recommendation of 12 VDC. Use a regulated power adapter capable of supplying at least 500 mA for reliable operation.
Can the DS-PI-Q200/FM be used outdoors?
No, it is designed for indoor use only. The operating temperature range is -10°C to +55°C, and exposure to water or humidity could damage the unit.
How can I reduce false alarms?
To reduce false alarms, adjust the pulse count to 2 or 3 via the jumper setting. Also keep the detector away from air vents, heaters, and direct sunlight, and clean the lens regularly with a soft dry cloth.
How do I clean the DS-PI-Q200/FM?
Turn off the detector, then gently wipe the outer surface and lens with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. The device is not sealed, so avoid liquid contact.
What does the LED indicator on the detector mean?
The red LED lights up when the detector is in alarm condition or during test mode. It may also flash if the tamper switch is activated. Refer to the user manual for exact LED timing patterns.
How do I connect the detector to my Hikvision alarm system?
Connect the detector's relay output (COM, NC, NO) to a zone input on your alarm control panel. Select NO or NC according to your panel's configuration. For specific wiring, check the manual or consult a professional installer.
Is the DS-PI-Q200/FM pet immune?
This model does not offer dedicated pet immunity. To avoid triggering from pets, consider setting a higher pulse count, lowering the sensitivity, or positioning the detector to avoid pet traffic areas.
What maintenance does the DS-PI-Q200/FM require?
Minimal maintenance is needed. Periodically check that the tamper switch is secure and the housing remains intact. Clean the lens only when dirty. There are no user-serviceable components; if a fault occurs, contact Hikvision support.
User questions about DS-PI-Q200/FM Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DS-PI-Q200/FM - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PI-Q200/FM by Hikvision.
USER MANUAL DS-PI-Q200/FM Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PI-Q200/FM
Category : Uncategorized