DS-TPT322-L2 - Uncategorized Hikvision - Free user manual and instructions
Find the device manual for free DS-TPT322-L2 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Camera |
| Model | DS-TPT322-L2 |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Max Resolution | 1920 × 1080 |
| Frame Rate | 30 fps |
| Lens | 2.8 mm fixed |
| Angle of View | 112° (horizontal) |
| Minimum Illumination | 0.01 Lux (color), 0 Lux with IR |
| IR Distance | Up to 30 m |
| Dimensions | 170 mm × 65 mm × 65 mm |
| Weight | 0.5 kg |
| Power Supply | 12 V DC, PoE (802.3af) |
| Power Consumption | Max. 5 W |
| Operating Temperature | -20°C to 60°C |
| Protection Rating | IP67 |
| Storage | MicroSD up to 128 GB, NVR |
| Video Compression | H.265+, H.265, H.264+, H.264 |
| Alarm Interface | 1 input, 1 output |
| Audio Interface | 1 input, 1 output |
| Network Interface | 1 × RJ45 10/100M |
| Analytics | Line crossing, intrusion detection |
Frequently Asked Questions - DS-TPT322-L2 Hikvision
How to reset the camera to factory default?
Press and hold the reset button on the device for 10 seconds using a paperclip. Alternatively, use the web interface under 'Maintenance'.
What is the maximum SD card supported?
The DS-TPT322-L2 supports microSD cards up to 128 GB. For continuous recording, use a high-endurance card.
Can I use this camera outdoors?
Yes, the camera has an IP67 rating for dust and water resistance, making it suitable for outdoor installation.
How to update the firmware?
Download the latest firmware from Hikvision website. Log into the camera web interface, go to 'Maintenance' > 'Upgrade' and upload the file.
What is the default IP address?
The default IP is 192.168.1.64. You can find it using the SADP tool from Hikvision.
How to enable motion detection?
In the web interface, go to 'Events' > 'Basic Event' > 'Motion Detection'. Enable and configure the detection area and sensitivity.
Does this camera support PoE?
Yes, the camera supports IEEE 802.3af Power over Ethernet, requiring only a single Ethernet cable for data and power.
Can I set the camera to record continuously?
Yes, you can set up continuous recording via NVR or using a microSD card. Configure the recording schedule in the 'Storage' settings.
How to clean the camera lens?
Use a soft, dry cloth to gently wipe the lens. Avoid harsh chemicals. For dirt, use a lens cleaning solution specifically for optics.
How to connect the camera to Wi-Fi?
This model is a wired network camera and does not support Wi-Fi. Use an Ethernet cable or a powerline adapter for network connectivity.
User questions about DS-TPT322-L2 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DS-TPT322-L2 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-TPT322-L2 by Hikvision.
USER MANUAL DS-TPT322-L2 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-TPT322-L2
Category : Uncategorized