DS-K7C01 - Uncategorized Hikvision - Free user manual and instructions
Find the device manual for free DS-K7C01 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Keypad with Card Reader |
| Brand | Hikvision |
| Model | DS-K7C01 |
| Dimensions (W x H x D) | 86 x 86 x 25 mm |
| Weight | 120 g |
| Power Supply | 12 V DC, 50 mA |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Card Type Supported | Mifare (ISO 14443A) |
| Keypad | 12 keys (0-9, *, #) |
| LED Indicators | Red/Green for status |
| Tamper Protection | Yes, tamper alarm |
| Protection Rating | IP65 (weatherproof) |
| Main Functions | Keypad entry, card reading, access control integration |
| Maintenance | Wipe with a soft dry cloth; avoid solvents |
| Safety Features | Tamper detection, secure communication (encrypted) |
| Spare Parts and Repairability | Contact Hikvision support for spare parts |
| Connection Type | RS-485 or Wiegand (depending on model variant) |
| Color | Black or white |
| Compatibility | Hikvision access control systems; third-party controllers via Wiegand |
| Installation | Wall-mounted with included screws |
| General Information | Designed for indoor and outdoor use |
Frequently Asked Questions - DS-K7C01 Hikvision
How do I install the DS-K7C01 keypad?
Mount the keypad on a wall using the provided screws. Connect the power supply (12V DC) and the communication wires (RS-485 or Wiegand) according to your system. Ensure proper sealing for outdoor installation.
What cards are compatible with this keypad?
The DS-K7C01 supports Mifare (ISO 14443A) cards. It does not support EM or other card types.
How do I add a new card user?
Enter programming mode using the master code (default 123456). Then press * followed by the user number and present the card. Follow the prompts to assign the card. Refer to the full manual for detailed steps.
What should I do if the keypad is not responding?
Check the power supply and wiring connections. Ensure the voltage is 12V DC. If the issue persists, try a factory reset by removing power and reapplying while pressing the # key for 5 seconds.
How do I reset the keypad to factory settings?
Disconnect power, then reconnect while holding the # key for 5 seconds. The LED will flash rapidly, confirming the reset. All data will be erased.
Can I use the DS-K7C01 with third-party access control systems?
Yes, it supports Wiegand output, which is a standard protocol. It can be integrated with most controllers that accept Wiegand input. Set the keypad to Wiegand mode via DIP switches (if available) or programming.
What is the maximum number of users?
The DS-K7C01 can store up to 1000 card users or PIN codes. This depends on the firmware version.
How do I clean the keypad?
Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents. For stubborn dirt, use a slightly damp cloth with mild soap, then dry immediately.
What does the tamper alarm do?
If the keypad is forcibly removed from the wall, the tamper switch triggers an alarm. The alarm output can be connected to the control panel for immediate notification.
Is the DS-K7C01 weatherproof?
Yes, it has an IP65 rating, making it suitable for outdoor use. Ensure the cable entry is sealed to maintain protection.
User questions about DS-K7C01 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DS-K7C01 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K7C01 by Hikvision.
USER MANUAL DS-K7C01 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K7C01
Category : Uncategorized