DS-K1101M/Face - Uncategorized Hikvision - Free user manual and instructions
Find the device manual for free DS-K1101M/Face Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Face Recognition Access Control Terminal |
| Brand | Hikvision |
| Model | DS-K1101M/Face |
| Display | 2.8-inch TFT LCD |
| Face Recognition Capacity | Up to 500 faces |
| Card Capacity | Up to 500 cards |
| Event Log Capacity | Up to 100,000 events |
| Communication | TCP/IP, Wiegand, RS-485 |
| Power Supply | 12V DC, 1.5A |
| Dimensions (W x H x D) | 138 mm x 88 mm x 26 mm |
| Weight | 0.3 kg |
| Working Temperature | -10°C to 55°C |
| Working Humidity | 10% to 90% (non-condensing) |
| IP Rating | IP65 |
| Authentication Modes | Face, card, PIN, or combination |
| Installation | Wall-mounted with included bracket |
| Maintenance | Clean lens with soft dry cloth; keep away from moisture |
| Security Features | Anti-forgery detection, tamper alarm |
| Spare Parts & Repairability | Contact Hikvision authorized service center for replacement parts |
| General Information | Supports remote management via Hik-Connect or iVMS-4200 |
Frequently Asked Questions - DS-K1101M/Face Hikvision
How do I reset the DS-K1101M/Face to factory defaults?
Press and hold the reset button (located near the power port) for 10 seconds until the device reboots. All settings will be cleared.
Can the DS-K1101M/Face be used outdoors?
Yes, it has an IP65 rating, making it dust-tight and protected against water jets, suitable for outdoor use under an eave.
What is the maximum number of face templates it can store?
It can store up to 500 face templates.
How do I connect the DS-K1101M/Face to a third-party access control system?
Use the Wiegand output (configurable for 26-bit or 34-bit) to interface with most third-party controllers.
Does the device support Wi-Fi?
No, it only supports wired Ethernet (TCP/IP) for network connectivity.
How often should I clean the camera lens?
Clean the lens with a soft, lint-free cloth when dirt or smudges affect recognition performance. Avoid using harsh chemicals.
What power supply is recommended?
Use a 12V DC power adapter with at least 1.5A output. The device consumes less than 5W.
Can I use the DS-K1101M/Face without a network?
Yes, it can operate standalone. Users can be enrolled locally via the keypad and admin menu.
How do I add a new user's face?
Enter the admin menu (default PIN 12345), select User Management, then Enroll Face and follow the on-screen instructions.
What is the warranty period?
Hikvision typically offers a 2-year limited warranty. Check with your dealer for specific terms.
User questions about DS-K1101M/Face Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DS-K1101M/Face - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1101M/Face by Hikvision.
USER MANUAL DS-K1101M/Face Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1101M/Face
Category : Uncategorized