VC-HD900BL - Car Radio VIETA - Free user manual and instructions
Find the device manual for free VC-HD900BL VIETA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Car radio with multimedia playback |
| Brand | VIETA |
| Model | VC-HD900BL |
| Installation size | 1 DIN standard |
| Power supply | 12 V DC (car battery) |
| Dimensions (W x H x D) | 178 x 50 x 100 mm |
| Weight | 1.2 kg |
| Output power (max) | 4 x 50 W |
| Output power (RMS) | 4 x 20 W |
| Radio tuner | FM/AM with RDS |
| Supported audio formats | MP3, WMA, WAV, FLAC |
| Bluetooth | Yes, hands-free calling and audio streaming |
| USB port | Front USB for playback and charging |
| SD card slot | Micro SD up to 32 GB |
| Auxiliary input | 3.5 mm front AUX input |
| Remote control | Included wired remote control |
| Steering wheel control | Compatible with optional adapter |
| Preamp output | 2 pairs RCA |
| Equalizer | 5-band EQ with presets |
| Maintenance | Wipe with a dry, soft cloth |
| Safety features | Fuse protection, short-circuit protection |
| Spare parts and repairability | Remote, wiring harness, mounting sleeve available |
| General information | Designed for most 12 V vehicles |
Frequently Asked Questions - VC-HD900BL VIETA
How do I pair my phone via Bluetooth?
Turn on the radio and enable Bluetooth on your phone. Search for available devices and select VC-HD900BL. Enter code 0000 if prompted. Once paired, you can make calls and stream audio.
Can I connect a USB drive?
Yes, plug your USB drive into the front port. The radio will automatically read MP3, WMA, WAV, and FLAC files. Use the SOURCE button to switch to USB mode.
How do I set the clock?
Press and hold the DISP button until the clock starts blinking. Use the volume knob to adjust hours, then press again to set minutes. Press DISP to confirm.
Why is there no sound from the speakers?
Check the speaker wires for proper connection. Ensure the built-in fuse is intact and the unit is not in mute mode. Also verify the volume level and the balance/fader settings.
How do I reset the unit?
Press the RESET button with a pointed object (e.g., a pen tip). This restores factory settings and may resolve most software issues.
Can I use the radio with steering wheel controls?
Yes, if your vehicle is equipped with steering wheel controls, you can purchase an optional adapter. Connect it to the SWC input on the rear of the unit and assign functions via the setup menu.
What should I do if the radio does not turn on?
Verify the ignition is on and the wiring harness is properly connected. Check the yellow (constant power) and red (switched power) wires for 12V. Inspect the fuse and replace if blown.
How do I improve radio reception?
Ensure the antenna is fully extended and connected. In weak signal areas, switch to stereo mono mode and adjust the tuner to a stronger frequency. Keep metal objects away from the antenna.
Does the radio have an equalizer?
Yes, it includes a 5-band equalizer (60 Hz, 250 Hz, 1 kHz, 4 kHz, 12 kHz) with presets like Pop, Rock, Classic, and Flat. Press the EQ button to cycle.
How do I clean the device?
Turn off the radio and wipe the front panel with a dry, soft cloth. Do not use any liquids or chemical cleaners, as they may damage the display or controls.
User questions about VC-HD900BL VIETA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car Radio in PDF format for free! Find your manual VC-HD900BL - VIETA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VC-HD900BL by VIETA.
USER MANUAL VC-HD900BL VIETA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VIETA
Model : VC-HD900BL
Category : Car Radio