MS-30 ECO - Water heater FAGOR - Free user manual and instructions
Find the device manual for free MS-30 ECO FAGOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | Fagor |
| Model | MS-30 ECO |
| Capacity | 30 liters |
| Installation | Wall-mounted vertical |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 1500 W |
| Energy Efficiency Class | B (ECO design) |
| Temperature Range | 30°C – 70°C |
| Max Operating Pressure | 8 bar |
| Safety Valve | Pressure relief valve included |
| Overheat Protection | Built-in thermal cutoff |
| Thermostat | Adjustable control |
| Tank Material | Enamelled steel with anti-corrosion layer |
| Insulation | Polyurethane foam (thick) |
| Dimensions (H × W × D) | 60 × 35 × 35 cm |
| Weight (empty) | 18 kg |
| Heating Time (full tank) | Approx. 70 minutes |
| Maintenance | Annual anode inspection / replacement |
| Spare Parts Availability | Available for 10 years after discontinuation |
| Warranty | 2 years (5 years on tank) |
Frequently Asked Questions - MS-30 ECO FAGOR
What is the capacity of the Fagor MS-30 ECO?
The Fagor MS-30 ECO has a 30-liter water tank, suitable for small households or point-of-use applications.
How do I install the water heater correctly?
Installation must be done by a qualified technician. Mount the unit vertically on a solid wall, connect the cold water inlet and hot water outlet, and wire to a 230V power supply with a proper earth ground. Ensure the pressure relief valve is installed and operated regularly.
How do I adjust the water temperature?
Turn the thermostat dial located behind the front access panel. Recommended setting is 60°C for safe hot water and energy savings. Wait for the heater to reach the set temperature before use.
How can I save energy with this water heater?
Use the ECO mode if available, set a moderate temperature (50-60°C), insulate exposed pipes, and drain sediment periodically to maintain efficiency. Also, take shorter showers to reduce hot water consumption.
How often should I perform maintenance?
We recommend a yearly inspection by a service agent. Replace the sacrificial magnesium anode every two years to prevent tank corrosion. Check the safety valve regularly for proper operation.
What should I do if the heater is not working?
First, check if the power supply is connected and the thermostat is set above ambient temperature. If the pilot light is off, reset the thermal cutoff. If problems persist, contact customer support for technical help.
How do I replace the magnesium anode?
Drain the tank, remove the anode access cover on the side, unscrew the old anode, and install a new one. Ensure you use the correct size (often Ø21 mm) and torque. For safety, leave this to a professional if unsure.
Is the water heater safe to leave on all the time?
Yes, the unit has a built-in thermostat and overheat protection, so it automatically maintains the set temperature. However, you can switch it off during long absences to save energy.
Can I install the heater myself?
Some countries allow DIY installation, but we strongly advise hiring a certified plumber to avoid electrical hazards and warranty issues. Incorrect installation may void the warranty.
Where can I find spare parts and the user manual?
The complete user manual is available in PDF format on notice-facile.com, and you can order original spare parts from Fagor authorized dealers or online service platforms.
User questions about MS-30 ECO FAGOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual MS-30 ECO - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS-30 ECO by FAGOR.