FA-24 N - Water heater FAGOR - Free user manual and instructions
Find the device manual for free FA-24 N FAGOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Instantaneous Gas Water Heater |
| Brand | Fagor |
| Model | FA-24 N |
| Energy Source | Natural Gas |
| Rated Power Input | 24 kW |
| Temperature Range | 30 °C - 60 °C |
| Flow Rate at ΔT 25°C | 10 L/min |
| Gas Connection | 1/2" BSP |
| Water Connection | 1/2" BSP |
| Ignition Type | Electronic (battery powered) |
| Safety Features | Flame failure device, overheat protection, anti-freeze |
| Dimensions (H x W x D) | 600 x 380 x 240 mm |
| Net Weight | 12 kg |
| Gas Category | I2H (Natural Gas) |
| IP Rating | IPX4 |
| Noise Level | < 50 dB |
| Efficiency | > 90% |
| Display | LED indicators |
| Controls | Front panel knobs/buttons |
| Warranty | 2 years |
| Certifications | CE |
Frequently Asked Questions - FA-24 N FAGOR
What type of gas does the FA-24 N use?
The FA-24 N is designed for natural gas (category I2H).
How do I install the water heater safely?
Installation must be carried out by a qualified professional. Ensure proper gas and water connections, adequate ventilation, and compliance with local regulations.
What is the recommended water pressure?
The recommended water pressure is between 0.5 and 8 bar. Use a pressure reducer if needed.
How do I adjust the water temperature?
Turn the temperature control knob on the front panel to set the desired output temperature (30-60°C).
What should I do if the heater doesn't ignite?
Check the gas supply, ensure the batteries in the igniter are fresh, and verify the water flow is sufficient. If the problem persists, contact a technician.
How often should I clean the water heater?
Clean the water filter (if present) every 3-6 months. Wipe the exterior with a damp cloth. Do not use abrasive cleaners.
Is the heater suitable for outdoor use?
No, this model has an IPX4 rating (splash-proof) and should be installed indoors or in a protected area.
What causes fluctuating water temperature?
Fluctuations may be due to variations in water pressure, gas supply issues, or a clogged heat exchanger. Check and adjust accordingly.
How do I replace the batteries in the igniter?
Open the battery compartment (usually located at the bottom or back) and replace with two AA batteries. Ensure correct polarity.
What does the error code on the LED display mean?
Refer to the user manual for specific error codes. Common codes include E1 (flame failure) and E2 (overheat). Contact support if needed.
User questions about FA-24 N FAGOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual FA-24 N - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FA-24 N by FAGOR.
USER MANUAL FA-24 N FAGOR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FAGOR
Model : FA-24 N
Category : Water heater