PIKE II 3108-2G - Controller ASUS - Free user manual and instructions
Find the device manual for free PIKE II 3108-2G ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | SAS RAID Controller Card |
| Model | PIKE II 3108-2G |
| Host Interface | PCIe 3.0 x8 |
| Controller Chipset | LSI SAS 3108 |
| Cache Memory | 2 GB DDR3 |
| Internal Ports | 2 x mini-SAS HD (SFF-8643), up to 8 drives |
| Supported Drive Types | SAS 12Gb/s, SATA 6Gb/s |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60, JBOD |
| Hardware Acceleration | Hardware RAID, XOR engine, cache offload |
| Form Factor | Low-profile MD2 with full-height and low-profile brackets |
| Dimensions | Approx. 17.3 x 6.6 cm (6.8 x 2.6 in) with bracket |
| Operating Temperature | 0 to 55 °C (32 to 131 °F) |
| Storage Temperature | -20 to 70 °C (-4 to 158 °F) |
| Power Consumption | Typical 20 W, maximum 30 W |
| Input Power | +12 V DC from PCIe slot |
| Cooling | Passive heatsink, requires system airflow |
| Maintenance and Cleaning | Use compressed air to remove dust; power off system before cleaning |
| Safety | Handle with anti-static precautions; install in a grounded server |
| Spare Parts and Repairability | No user-replaceable parts; contact ASUS support for repairs |
| General Information | Designed for ASUS server motherboards with PIKE slots |
Frequently Asked Questions - PIKE II 3108-2G ASUS
What is the ASUS PIKE II 3108-2G compatible with?
It is designed for ASUS server motherboards with a dedicated PIKE slot. Check your motherboard's user manual to confirm compatibility.
Does it support SSD caching?
Yes, it supports SAS and SATA SSDs. With SSD caching and RAID modes, you can create hybrid volumes for improved performance.
How many drives can I connect?
Using the two internal mini-SAS HD ports, you can connect up to 8 SAS or SATA drives directly. With expanders, you can attach more.
Can I use this controller on a desktop PC?
It requires a PCIe 3.0 x8 slot, but the firmware and connector may be optimized for ASUS server boards. It might not boot on consumer motherboards without custom BIOS.
How do I recover the password if lost?
The controller does not have a built-in password. If you set one in the configuration utility, you can clear it by using the factory reset jumper or contacting ASUS support.
How to update the firmware?
Download the latest MegaRAID firmware from the ASUS support site. Use the MSM (MegaRAID Storage Manager) or bootable DOS tool to flash.
What are the LED indicators on the card?
Most PIKE cards have a small LED showing activity or fault. Refer to the motherboard manual for exact signal descriptions.
Is the cache battery-backed?
The card includes 2GB DDR3 cache. A separate battery backup unit (BBU) may be supported, but it is not included. Some versions have a supercapacitor; verify your model.
What is the default RAID configuration?
The card ships with JBOD mode or no configuration. You must create a RAID array using the config utility.
How can I tell if the card is properly installed?
During boot, the BIOS will show a MegaRAID banner. Also, the operating system will list the controller in Device Manager.
User questions about PIKE II 3108-2G ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual PIKE II 3108-2G - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PIKE II 3108-2G by ASUS.
USER MANUAL PIKE II 3108-2G ASUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASUS
Model : PIKE II 3108-2G
Category : Controller