100507 - Receiver MuxLab - Free user manual and instructions
Find the device manual for free 100507 MuxLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDMI Receiver |
| Brand | MuxLab |
| Model | 100507 |
| Input Interface | 1x HDMI, 1x RJ45 (CAT5e/6) |
| Output Interface | 1x HDMI |
| Maximum Resolution | 1920x1080p @ 60Hz |
| Supported Audio Formats | LPCM, Dolby Digital, DTS |
| Transmission Distance | Up to 60 meters over CAT6 |
| HDCP Compliance | HDCP 1.4 |
| Power Supply | 5V DC, 1A (via included adapter) |
| Power Consumption | 2.5W (max) |
| Dimensions (W x H x D) | 110 x 25 x 60 mm |
| Weight | 0.25 kg |
| Mounting Options | Desktop or wall-mount via screw holes |
| LED Indicators | Power, Link, Signal |
| Housing Material | Aluminum with black finish |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Clearance Requirements | 50 mm on each side for airflow |
| Cleaning Instructions | Wipe with dry soft cloth; avoid liquids |
| Safety Features | Over-current and short-circuit protection |
| Spare Parts Availability | Power adapter and mounting screws can be replaced |
| Repairability | Moderate; internal components not user-serviceable |
| Warranty | 1 year limited |
Frequently Asked Questions - 100507 MuxLab
What is the MuxLab 100507 receiver used for?
The MuxLab 100507 is an HDMI receiver that works with a compatible transmitter to extend HD audio/video signals over a single CAT5e/6 cable, ideal for home theater or presentation setups.
How do I connect the receiver to my TV?
Connect an HDMI cable from the receiver's HDMI output to your TV, then run a CAT5e/6 cable from the transmitter to the receiver's RJ45 port. Ensure both units are powered on.
What is the maximum cable distance supported?
The receiver supports video transmission up to 60 meters (200 feet) over CAT6 cable with a 1080p signal. Use high-quality solid-core cable for best results.
Why is there no signal on my display?
First, verify that the power LED is lit on both transmitter and receiver. Check that the CAT5e/6 cable is properly terminated and not damaged. Confirm the HDMI input is selected on your TV, and that the source device is transmitting.
Does the receiver support 4K resolution?
No, the MuxLab 100507 supports resolution up to 1080p at 60Hz. It is not designed for 4K sources, so connect it to 4K devices only when the output is set to 1080p.
Can I use this receiver with any HDMI source?
The receiver complies with HDCP 1.4, so it works with most HDMI sources such as DVD players, streaming devices, and computers as long as they output HDCP 1.4 or lower. It may not work with HDCP 2.2 content.
What kind of power adapter is required?
The receiver needs a 5V DC adapter with at least 1A output. Only use the supplied adapter or a qualified equivalent to avoid damage.
How do I clean and maintain the receiver?
Unplug the device and wipe the exterior with a soft, dry cloth. Do not use chemical cleaners or water. Ensure the vents are dust-free for proper cooling.
Can I mount the receiver on a wall?
Yes, the receiver has mounting holes on the bottom. Use the included screws to attach it to a flat surface. Ensure the environment is dry and well-ventilated.
What are the main safety precautions?
Keep the receiver away from moisture and heat sources. Do not block ventilation. Disconnect power during thunderstorms or if the device produces smoke. Refer to the manual for full safety instructions.
User questions about 100507 MuxLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual 100507 - MuxLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 100507 by MuxLab.