100500 - Receiver MuxLab - Free user manual and instructions

Type	HDMI Receiver / Extender
Model	100500
Brand	MuxLab
Dimensions (W x D x H)	4.2 x 2.8 x 1.0 inches (107 x 71 x 25 mm)
Weight	0.35 lbs (160 g)
Power Supply	5 V DC via micro USB (adapter included)
Power Consumption	2.5 W max
HDMI Input	1 x HDMI Type A female
HDMI Output	1 x HDMI Type A female
Supported Resolution	Up to 4K@60Hz (4:4:4)
HDMI Version	2.0
HDCP Support	HDCP 2.2 / 1.4
Maximum Distance (with transmitter)	Up to 230 ft (70 m) via Cat6
Enclosure Material	Metal
Operating Temperature	32°F to 104°F (0°C to 40°C)
Certifications	FCC, CE, RoHS

Frequently Asked Questions - 100500 MuxLab

How do I connect the MuxLab 100500 receiver?

Connect an HDMI source to the transmitter, then connect the transmitter and receiver using a Cat5e/6 cable. Finally, connect the receiver to your display via HDMI.

What cable type is required for extension?

A shielded Cat5e or Cat6 cable with solid copper conductors is recommended for optimal performance.

What is the maximum supported resolution?

The device supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling.

Does the receiver require external power?

Yes, it requires 5 V DC via the included micro USB adapter. The transmitter may also need power depending on model.

What does the LED indicate?

A solid green LED indicates power is on and the link is active. A blinking LED may indicate no signal or connection issue.

Can I use the receiver with a non-MuxLab transmitter?

It is designed to work with MuxLab transmitters. Compatibility with third-party devices is not guaranteed.

How do I troubleshoot no signal?

Check cable connections, ensure power is applied, verify the source is outputting video, and try a different HDMI cable.

What is the maximum distance between transmitter and receiver?

Up to 230 feet (70 meters) using Cat6 cable at 1080p. Distance may decrease at 4K.

Is HDCP 2.2 supported?

Yes, it supports HDCP 2.2 for protected content such as 4K streaming.

How do I clean the device?

Disconnect power and wipe the enclosure with a dry, soft cloth. Do not use liquid cleaners.

USER MANUAL 100500 MuxLab

Environment HDMI 1.4 (3D)
Devices	DVD/Blu-Ray, plasma, projectors, monitors, TV, PC, laptc
Transmission	Transparent to the use
Frequency	25 to 340 MHz
Signal	HDMI 1.4 protoco
Connectors	HDMI receptacle
LEDs Power: Green	Input & Output Link: Blu
Resolution	480i to 1080p @ 50/60 FPS1080p @ 24/50/60 FPS3840 X 2160 @ 24/25/30 FPSVGA to UXGA
Color	8, 10 & 12 bi
Audio	LPCM 7.1CH, Dolby TrueHD and DT-HD Master Audio
HDCP	Revision 1.:
Cable	HDMI Cable
Power Supply	5VDC, 1A, P/N: BI12T-050100I
Temperature Operating: 0°	to 40°C Storage: -20° to 60°CHumidity: up to 90% no-condensing
Enclosure	Metal enclosure
Dimension	3.50" x 2.00" x 1.00" 89 mm x 51 mm x 25 mi
Weight	0.8 lbs (0.36 Kg
Compliance	Regulatory: FCC, CE, RoHS
Warranty	2 years
Order Information	100500 HDMI 1X2 Splitter, UHD-4K (UPC:627699505007)

2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7

Tel: [phone] Fax: [phone]

Toll Free (North America): [phone]

E-mail: [e-mail] URL: www.muxlab.com

HDMI 1X2 Splitter, UHD-4K (100500) Quick Installation Guide

Overview

The HDMI 1x2 Splitter (100500) allows one (1) HDMI source to be distributed to up to two (2) HDMI displays. The splitter supports up to 4K (3840 X 2160), 8-bit color and HD audio. The splitter is HDCP 1.3 compliant and features LED diagnostics. Additionally, all HDMI connectors are on the rear panel for neater cabling. Applications include; commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems.

Pre-Installation Check

Identify the connectors as indicated on the product

Installation

In order to install the HDMI 1X2 Splitter, please follow the steps below:

1. Connect the HDMI video source to the input connector of the splitter.
2. Connect the HDMI display equipment(s) to output connector of the splitter.
3. Connect the 5 VDC power supply to the splitter first, and then plug the power supply into an AC power outlet.
4. Power on the HDMI equipment and verify the image quality.
5. The following diagram shows the final configuration.

graph LR
    A["HDMI Source"] -->|HDMI Cable| B["HDMI Splitter 100500"]
    B -->|HDMI Cable| C["HDMI HDTV 1"]
    B -->|HDMI Cable| D["HDMI HDTV 2"]

Troubleshooting

The following tables describe some of the symptoms, probable causes and possible solutions in respect to the installation of the HDMI 1X2 Splitter. If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at 877-689-5228 (toll-free in North America) or ([phone] (International).

Picture/ Sound	Probable Cause Possible Solution
No Image Wiring Check continuity		Check correct wiring
No Image Synchronization Power off the source and the display. Power on the devices.
Flickering Image	Synchronization Check HDMI cable length
Choppy Sound	Synchronization Check HDMI cable length
Noise in image	Weak signal Check HDMI cable length
Green or pink huc	Cable Check HDMI cables and replace.