PHONIC

iSK12A Deluxe - Loudspeaker PHONIC - Free user manual and instructions

Find the device manual for free iSK12A Deluxe PHONIC in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PHONIC iSK12A Deluxe - page 4
View the manual : English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Active PA Loudspeaker
Brand Phonic
Model iSK12A Deluxe
Speaker Configuration 2-way powered loudspeaker
Woofer 12" (30.5 cm) high-efficiency woofer
Tweeter 1" (2.54 cm) titanium compression driver
Amplifier Power 200W RMS / 400W peak
Frequency Response 55 Hz - 20 kHz
Maximum SPL 124 dB peak
Inputs 2 x combo XLR/TRS mic/line inputs
Outputs 1 x balanced XLR mix out
Controls Input volume, tone/equalization, power switch
Enclosure Material Molded ABS plastic with steel grille
Mounting 35 mm pole socket for speaker stands
Dimensions (W x H x D) 356 x 610 x 330 mm (approx.)
Weight 15 kg (approx.)
Power Requirements 100-240 V AC, 50/60 Hz
Power Consumption 90 W at typical operation
Applications Live sound, conferences, speech, music playback
Maintenance Wipe with dry cloth; keep ventilation slots clean
Safety Ensure stable placement; use grounded power outlet
Repairability Replaceable amplifier module and drivers

Frequently Asked Questions - iSK12A Deluxe PHONIC

How do I connect a microphone to the Phonic iSK12A Deluxe?
Connect the microphone to an XLR input using a balanced cable, then adjust the input level control.
Can I use the iSK12A Deluxe as a floor monitor?
Yes, its trapezoidal enclosure allows it to be angled for wedge monitoring on stage.
Why does the speaker hum when plugged into a mixer?
This is often due to a ground loop. Try connecting all equipment to the same power outlet or using a direct injection ground lift.
How do I avoid feedback during a speech?
Position the speaker in front of the microphone, reduce the gain, and lower the high-frequency EQ if the microphone is sensitive.
What cables do I need for stereo operation?
Use two XLR or TRS cables from your mixer left/right outputs to the corresponding inputs on each speaker.
Can I mount the speaker on a standard pole?
Yes, it has a 35 mm socket that fits standard speaker stands or poles.
How to clean the iSK12A Deluxe?
Use a dry microfiber cloth on the cabinet and a soft brush on the grille. Never use liquids directly.
What is the recommended maintenance schedule?
Check connections and ventilation monthly, and periodically inspect the power cable for damage.
Is it possible to replace the tweeter?
Yes, the tweeter is user-replaceable after removing the grille; contact Phonic support for genuine parts.
Can I use this speaker for outdoor events?
It is fine for covered outdoor stages, but not waterproof; protect it from rain and moisture.

User questions about iSK12A Deluxe PHONIC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual iSK12A Deluxe - PHONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iSK12A Deluxe by PHONIC.

USER MANUAL iSK12A Deluxe PHONIC

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PHONIC

Model : iSK12A Deluxe

Category : Loudspeaker