iSK 10 Deluxe - Pregnant PHONIC - Free user manual and instructions
Find the device manual for free iSK 10 Deluxe PHONIC in PDF.
User questions about iSK 10 Deluxe PHONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pregnant in PDF format for free! Find your manual iSK 10 Deluxe - PHONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iSK 10 Deluxe by PHONIC.
USER MANUAL iSK 10 Deluxe PHONIC
natural_image
Line drawing of various household appliances including a white refrigerator, a blue box labeled 'PHONIC', and a matching case with a logo (no text or symbols on main objects)WWW.PHONIC.COM
iSK 8 (Deluxe)
iSK IO (Deluxe)
iSK 12 (Deluxe)
iSK 15 (Deluxe)
iSK 215 (Deluxe)
iSK 18SB (Delux€)
User's Manual
Manual del Usuario
iSK 8 (Delux€)
iSK IO (Delux€)
iSK I2 (Delux€)
iSK I5 (Delux€)
iSK 215 (Delux€)
iSK 18SB (Delux€)
PASSIVE SPEAKER
ALTAVOZ PASIVO
ENGLISH ......I
ESPAÑOL ......II
USER'S MANUAL
CONTENTS
SAFETY INSTRUCTIONS 1
INTRODUCTION 1
SUGGESTED SETUP METHODS 1
FEATURES 1
SPECIFICATIONS 2
APPENDIX
APPLICATIONS 1
Phonic preserves the right to improve or alter any information within this document without prior notice
IMPORTANT SAFETY INSTRUCTIONS
The apparatus shall not be exposed to dripping or splashing and that no objects will liquids, such as vases, shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
Warning: the user shall not place this apparatus in the confined area during the operation so that the mains switch can be easily accessible.
- Read these instructions before operating this apparatus.
- Keep these instructions for future reference.
- Heed all warnings to ensure safe operation.
- Follow all instructions provided in this document.
- Do not use this apparatus near water or in locations where condensation may occur.
-
Clean only with dry cloth. Do not use aerosol or liquid cleaners. Unplug this apparatus before cleaning.
-
Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified manufacturer.
-
Use only with a cart, stand, tripod, bracket, or table specified manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lighting storms or when unused for long periods of time.
- Refer all servicing to serviced personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: To reduce the risk of fire electric shock, do not expose this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance of procedures other than those may result in hazardous radiation exposure.
SAFETY INSTRUCTIONS
- Read all instructions carefully before using your iSK Speakers.
- Keep this safety and instruction flier for future reference.
- Ensure you follow all instructions carefully.
- When used in conjunction with Amplifiers or Powered Mixers ensure you follow the correct procedures in the set up and turning on and off of audio equipment. It is advisable, when an entire sound system is set up, that the power amplifier or powered mixer that you are using is turned on last (ie. That any source equipment, such as guitars, tape decks, etcetera, are turned on first). After all source equipment is turned on and have stabilized, ensure the power amp or powered mixer's level control is set to a minimal level and then activate, after which the level control can be set to a reasonable level. This should be done in reverse when shutting down: turn off the power amp or powered mixer first, then turn off all other devices. However many professional amplifiers feature delayed on/off circuits that can perform this automatically.
- Warning – The iSK Speakers generate extremely high sound pressure levels. Ensure you take care in the placement and operation to avoid exposure to extremely high sound levels, to reduce to risk of causing permanent hearing damage.
- Cables – Under no circumstances should you use shielded or microphone cables for connecting speakers to amplifiers. These cables are not heavy enough to be able to handle the amplifier load and could cause irreversible damage to your system.
- Mounting – The suspending, rigging and mounting of the iSK Speakers can cause members of the public to be exposed to serious health risk, as well as the possibility of death. If you are NOT fully qualified and certified to mount these speakers by relevant local, state, or national authorities, do not under any circumstances try to rig, suspend or mount this system. All relevant safety regulations must be followed. If you are not completely qualified or do not know of said regulations, ensure you consult qualified personnel for assistance.
- Servicing – Do not under any circumstances try to service this product yourself. If servicing is required, contact your local service center.
INTRODUCTION
The iSK represents the best of Phonic's speaker revolution. The iSK's visually stunning vertical curvature enhances audio dispersion and works with internal bracing to increase structural strength and to minimize diffraction. Phonic's proprietary Wing-Guide™ horn, developed using computer-aided modeling, offers extremely balanced sound projection and low distortion even at high volumes. Our development team also crafted 1.8" pure titanium compression tweeters and long-throw composite woofers to ensure the iSK's sound quality matches its stunning cosmetics. The durability of the iSK series is unmatched. The iSK is protected by professional-grade carpeting while the iSK Deluxe is protected by multi-layer scratchproof paint. The iSK series is the most versatile in its class with metal pole mounts, a 45° floor monitor position for two-way models, and ergonomic handles. With an unsurpassed audio response, sensational power handling, and fantastic flexibility, the iSK establishes a new benchmark.
FEATURES
● RMS power ratings certified and tested using the IEC 268-5 torture test
● Internal bracing system increases structural strength
- New 1.8" pure titanium compression tweeter paired with Phonic's proprietary Wing-Guide™ horn delivers smooth, transient highs beyond 22kHz
● Wide 90^ x70° dispersion angle
● New long-throw composite woofers
● Professional Speakon In/Out Connections
- Serve as floor monitors when tilted on the side (Two-way models)
● Powder coated 18 gauge steel with acoustically transparent foam
● Thick carpet protection on iSK, 3-layer scratch-proof paint on Deluxe models
- Ergonomic metal handles on the iSK and integrated handles on Deluxe models
Equalization
The iSK speakers are design to perfectly reproduce all audio signals as sent by your amplifier or powered mixer. As such, your equalization efforts do not need to take speaker response into account, rather your main concentration should be on the acoustics of the venue. If equalization is applied, it should be done so with the utmost of case. Applying overly harsh equalization can be detrimental to your overall sound.
Connection
The iSK speakers are equipped with professional Speakon speaker connectors on the rear of the speaker. The input connectors on each unit should be connected to an appropriate output device such as a power amplifier or powered mixer. The Speakon connectors do not need to be soldered into place; rather they are pushed into the socket and turned clockwise to lock. Once all equipment is turned off, twist the connector counter-clockwise to disconnect. The output connector can be used to run two (or more) speakers in parallel.
Speakon connector
Pin + = + on amplifier
Pin - = - on amplifier
Impedances
With exception to the iSK215 and iSK18SB, the nominal impedance of the iSK speakers is 8Ω. This means that a single iSK speaker can be used with an amplifier channel that can run down to 8Ω. Similarly, two speakers can be used with an amplifier that can run at 4Ω per channel and four speakers can be used with an amplifier that can run at impedances of 2Ω (check the amplifier's recommended operation before doing so). The nominal impedance of the iSK215 and iSK18SB is 4 ohms and thus a single unit can be used with an amplifier that runs down to 4 ohms per channel.
Operation
When making a connection, be sure to turn off the amplifier that you are connecting to. Use professional Speakon connectors and cables only. Once connections are made, turn the amplifier on with all channels set to the zero position. Be sure not to drive the amplifier to the point of overload or clipping for any length of time as to ensure the integrity of the speaker's voice coil.
SPECIFICATIONS
| Model Name iSK 8 (Deluxe) iSK 10 (Deluxe) iSK 12 (Deluxe) iSk 15 (Deluxe) iSK 215 (Deluxe) iSK 18SB (Deluxe) | ||||||
| System Type | 8" 2-Way Stage Speaker and Floor Monitor | 10" 2-Way Stage Speaker and Floor Monitor | 12" 2-Way Stage Speaker and Floor Monitor | 15" 2-Way Stage Speaker and Floor Monitor | Dual 15" 2-Way Stage Speaker | 18" Subwoofer |
| Frequency Response (+/- 3dB) | 70Hz-20kHz 65Hz-20kHz 52Hz-22kHz 48Hz-22kHz 38Hz-22kHz 35Hz-250Hz | |||||
| Power Handling (RMS IEC 268-5) | 175W 200W 350W 350W 700W 500W | |||||
| Power Handling (Music) | 350W 400W 700W 700W 1400W 1000W | |||||
| Power Handling (Peak) | 700W 800W 1400W 1400W 2800W 2000W | |||||
| Sensitivity 1W@1M | 95dB 97dB 98dB 98dB 100dB 99dB | |||||
| System Impedance | 8ohm 8ohm 8ohm 8ohm 4ohm 4ohm | |||||
| Woofer | 8" | 10" | 12" | 15" | Dual 15" | 18" |
| Woofer Voice Coil | 38mm / 1.5in | 50.8mm / 2in | 66mm/2.6in | 66mm/2.6in | 66mm/2.6in | 100mm/4.0in |
| Tweeter | 1" Titanium | 1" Titanium | 1.8" Titanium | 1.8" Titanium | 1.8" Titanium | - |
| Horn and System Dispersion | 70°x70° Conical | 70°x70° Conical | 90°x70° Wing-GuideTM | 90°x70° Wing-GuideTM | 90°x70° Wing-GuideTM | - |
| Crossover Design | 3rd order with HF bulb protection | 3rd order with HF bulb protection | 3rd order with HF bulb protection | 3rd order with HF bulb protection | 3rd order with HF bulb protection | Selectable lowpass |
| Exterior (Deluxe Models) | Carpet (Scratch-proof paint) | Carpet (Scratch-proof paint) | Carpet (Scratch-proof paint) | Carpet (Scratch-proof paint) | DCarpet (Scratch-proof paint) | Carpet (Scratch-proof paint) |
| Grille | Powder coated 18 gauge steel with acoustically transparent foam | Powder coated 18 gauge steel with acoustically transparent foam | Powder coated 18 gauge steel with acoustically transparent foam | Powder coated 18 gauge steel with acoustically transparent foam | Powder coated 18 gauge steel with acoustically transparent foam | Powder coated 18 gauge steel with acoustically transparent foam |
| Wood type (Deluxe Models) | 15mm MDF (Plywood / MDF) | 15mm MDF (Plywood / MDF) | 15mm MDF (Plywood / MDF) | 15mm MDF (Plywood / MDF) | 18mm MDF (Plywood / MDF) | 18mm MDF (Plywood / MDF) |
| Pole Mount | Metal Pole Mount | Metal Pole Mount | Metal Pole Mount | Metal Pole Mount | - | Metal Pole Mount |
| Handles (Deluxe Models) | Metal handle (Integrated) | Metal handle (Integrated) | Metal handles (Integrated) | Metal handles (Integrated) | Metal handles (Integrated) | Metal handles (Integrated) |
| Net Weight | 11.20kg/24.7lbs | 14.20kg/31.30lbs | 23.5kg/51.7lbs | 28.5kg/62.7lbs | 50kg/110lbs | 47kg/103.4lbs |
| Unit Dimension (HxWxD) | 450x285x275mm (17.7x11.2x10.8in) | 505xx330x325mm (19.9x13.0x12.8in) | 627x395x370mm (24.7x15.5x14.6in) | 717x460x435mm (28.2x18.1x17.1in) | 1170x460x435mm (46.1x18.1x17.1in) | 517x630x620mm (21.1x24.4x24.4in) |
| Connectors | Speakon x 2 | Speakon x 2 | Speakon x 2 | Speakon x 2 | Speakon x 2 | Speakon x 2 |
SERVICE AND REPAIR
For replacement parts, service and repairs please contact the Phonic distributor in your country. Phonic does not release service manuals to consumers, and advice users to not attempt any self repairs, as doing so voids all warranties. You can locate a dealer near you at http://www.phonic.com/where/.
WARRANTY INFORMATION
Phonic stands behind every product we make with a no-hassles warranty. Warranty coverage may be extended, depending on your region. Phonic Corporation warrants this product for a minimum of one year from the original date of purchase against defects in material and workmanship under use as instructed by the user's manual. Phonic, at its option, shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of the date of purchase. You will need it for any warranty service. No returns or repairs will be accepted without a proper RMA number (return merchandise authorization). In order to keep this warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying this warranty. Any tampering of the product or attempts of self repair voids all warranty. This warranty does not cover any damage due to accident, misuse, abuse, or negligence. This warranty is valid only if the product was purchased new from an authorized Phonic dealer/distributor. For complete warranty policy information, please visit http://www.phonic.com/warranty/.
CUSTOMER SERVICE AND TECHNICAL SUPPORT
We encourage you to visit our online help at http://www.phonic.com/support/. There you can find answers to frequently asked questions, tech tips, driver downloads, returns instruction and other helpful information. We make every effort to answer your questions within one business day.
support@phonic.com
http://www.phonic.com
PHONIC