VMD2 - TV Stand SANUS - Free user manual and instructions
Find the device manual for free VMD2 SANUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Flat-panel TV wall mount |
| Model | VMD2 |
| Brand | Sanus |
| Compatible Display Sizes | 23 to 42 inches |
| VESA Compatibility | 100x100 mm to 200x200 mm |
| Maximum Weight Capacity | 30 kg (66 lbs) |
| Tilt Range | -5° to +15° |
| Profile Distance from Wall | 2.2 inches (5.6 cm) |
| Material | Reinforced steel plate |
| Mounting Configuration | Single-stud wall plate |
| Horizontal Adjustment | ±4 degrees |
| Level Adjustment | 0 to 10 degrees |
| Installation Type | Wall mount with lag bolts |
| Included Hardware | Bolts, spacers, washers for common VESA patterns |
| Safety Compliance | UL Listed |
| Maintenance Instructions | Wipe with a soft, dry cloth |
| Repair / Spare Parts | Replacement parts available from Sanus customer service |
| Warranty | Manufacturer’s 5-year limited warranty |
| Net Weight | 2.1 kg (4.6 lbs) |
| Gross Weight | 2.7 kg (6 lbs) |
Frequently Asked Questions - VMD2 SANUS
What is the maximum VESA size?
The VMD2 supports VESA patterns from 100x100 mm up to 200x200 mm.
Can this wall mount hold a 50-inch TV?
No, the VMD2 is designed for displays between 23 and 42 inches. Larger TVs exceed the weight and VESA specifications.
What is the maximum weight capacity?
The maximum weight capacity is 30 kg (66 lbs). Always check your TV's weight before mounting.
How far from the wall will my TV sit?
The mount keeps the TV at a distance of 2.2 inches (5.6 cm) from the wall when fully retracted, giving it a low-profile look.
Does the VMD2 allow tilting?
Yes, it offers a tilt range from -5° to +15°, helping to reduce glare and improve viewing angles.
What tools are required for installation?
You will need a drill to place lag bolts, a socket wrench or nut driver to tighten them, and a level to ensure the mount is straight.
Can it be installed on a brick or concrete wall?
The VMD2 is designed for wood studs, but with appropriate masonry anchors (not included) it can be mounted on solid concrete or brick walls. Always consult a professional if you're unsure.
How should I clean the wall mount?
Wipe it with a soft, dry cloth to remove dust. Avoid using any abrasive cleaners or liquids that could damage the finish.
Are the screws for my TV included?
Yes, the package includes a hardware kit with a selection of screws, spacers and washers to fit common VESA patterns on most displays.
Can I adjust the TV after it is mounted?
The mount features horizontal adjustment (±4 degrees) and level adjustment (0-10 degrees), so you can fine-tune the TV's position after installation.
User questions about VMD2 SANUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV Stand in PDF format for free! Find your manual VMD2 - SANUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VMD2 by SANUS.
USER MANUAL VMD2 SANUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANUS
Model : VMD2
Category : TV Stand