H2 - Laser level PLS - Free user manual and instructions
Find the device manual for free H2 PLS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Niveau laser |
| Modèle | H2 |
| Marque | PLS |
| Classe laser | Classe 2 (puissance < 1 mW) |
| Précision | ±0.3 mm/m |
| Portée de travail | Jusqu'à 15 m (selon les conditions de luminosité) |
| Fonctions principales | Projection de lignes horizontales et verticales, auto-nivellement, mode verrouillé pour utilisation inclinée |
| Auto-nivellement | Oui, plage de nivellement ±4° |
| Alimentation | 3 piles AA (1,5 V) |
| Autonomie des piles | Environ 25 heures (utilisation continue) |
| Dimensions (L × l × H) | 100 × 90 × 70 mm |
| Poids | 250 g (sans piles) |
| Fixation | Filetage de trépied 1/4" intégré |
| Indice de protection | IP54 (résistant à la poussière et aux éclaboussures) |
| Contenu du coffret | Niveau laser, support de montage, 3 piles AA, étui de protection |
| Entretien et nettoyage | Essuyer l'objectif avec un chiffon doux et sec, ne pas utiliser de solvants |
| Sécurité | Ne pas regarder directement le faisceau, tenir hors de portée des enfants |
| Pièces détachées et réparabilité | Piles remplaçables, support de montage disponible en option |
| Garantie | Garantie constructeur 1 an |
| Conditions d'utilisation | Température de fonctionnement : -10 °C à +50 °C |
| Stockage | Ranger dans un endroit sec et tempéré, retirer les piles en cas de stockage prolongé |
Frequently Asked Questions - H2 PLS
How do I turn on the PLS H2 laser level?
Press the power button on the side of the device. The laser lines will turn on immediately. To turn it off, press the same button again.
What is the accuracy of the PLS H2?
The PLS H2 has an accuracy of ±0.3 mm/m, meaning the projected line deviates less than 0.3 mm for every meter of distance.
Can I use the H2 outdoors?
Yes, but the visibility of the laser lines will decrease in bright sunlight. For outdoor use, a detector may be required to extend the working range.
How do I change the batteries?
Open the battery compartment on the back of the device. Insert 3 new AA batteries respecting the polarity markings, then close the compartment securely.
What does the lock mode do?
The lock mode disables the auto-leveling function, allowing the device to project lines at any angle. This is useful for aligning sloped or diagonal surfaces.
How do I mount the PLS H2 on a tripod?
The device has a 1/4-inch thread on the bottom. Simply screw it onto any standard camera or laser tripod for stable positioning.
What is the working range of the PLS H2?
The H2 has a working range of up to 15 meters under normal indoor lighting conditions. Using a detector can extend this range for outdoor applications.
How should I clean the laser lens?
Use a soft, dry cloth to gently wipe the lens. Avoid using water, solvents, or abrasive cleaners that could scratch or damage the optics.
Is the PLS H2 waterproof?
The H2 has an IP54 rating, meaning it is protected against dust and splashing water. It is not waterproof and should not be submerged.
What safety precautions should I take?
Never look directly into the laser beam, as it can cause eye injury. Keep the device away from children and avoid pointing the laser at reflective surfaces.
User questions about H2 PLS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Laser level in PDF format for free! Find your manual H2 - PLS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H2 by PLS.
USER MANUAL H2 PLS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PLS
Model : H2
Category : Laser level