MDD78S-E - Uncategorized Micro Matic - Free user manual and instructions
Find the device manual for free MDD78S-E Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Beverage Dispenser |
| Brand | Micro Matic |
| Model | MDD78S-E |
| Suitable for | Dispensing draught beer |
| Cooling system | Integrated forced-air refrigeration |
| Temperature range | 3°C to 8°C (adjustable via digital thermostat) |
| Beverage capacity | Accommodates up to two standard kegs |
| Number of taps | 2 |
| Drip tray | Removable stainless steel drip tray included |
| Material | Stainless steel housing and drip tray |
| Dimensions (W × H × D) | 780 × 850 × 600 mm |
| Weight | 95 kg |
| Power supply | 220–240 V AC, 50/60 Hz |
| Power consumption | 350 W |
| Refrigerant | R290 (environmentally friendly) |
| Defrost | Automatic defrost system |
| Temperature control | Digital thermostat with LED display |
| Cleaning | Removable beer lines and tap components for easy hygiene |
| Safety | Overheat protection and safety pressure valve |
| Certifications | CE and RoHS compliant |
| Warranty | 2-year manufacturer warranty |
| Repairability | Modular design; spare parts available from Micro Matic |
| Included accessories | CO2 regulator, beer lines, and tapping couplers |
| Installation type | Free-standing or under counter (ventilation required) |
Frequently Asked Questions - MDD78S-E Micro Matic
How do I properly install the MDD78S-E beverage dispenser?
Ensure the unit is placed on a level, stable surface with at least 10 cm of ventilation space around the sides and back. Allow the refrigerator to settle for 24 hours after transport before switching it on. Then connect the CO2 supply and keg couplers as described in the manual.
What is the ideal serving temperature for draught beer?
The recommended serving temperature is between 3°C and 5°C. Set the digital thermostat to 4°C for a balanced carbonation and head retention. For different beer styles, adjust within the 3–8°C range.
How do I connect a CO2 cylinder to the MDD78S-E?
Connect the CO2 regulator to the cylinder valve, then attach the gas line to the inlet fitting on the rear of the dispenser. Open the cylinder valve slowly and set the pressure to 10–12 psi for most ales and lagers. Always use a pressure relief valve.
How often should I clean the dispensing system?
Clean the beer lines and taps after each keg replacement or at least every two weeks. Use a professional line cleaner solution and rinse thoroughly with water. The drip tray and exterior should be wiped daily to maintain hygiene.
What types of kegs are compatible with this dispenser?
It accommodates standard Cornelius kegs and most half-barrel kegs with compatible couplers. Check the keg connection type (e.g., ball lock, pin lock, or D-type) and select the appropriate tapping coupler for your keg.
The dispenser is not cooling properly. What should I check?
First, verify the temperature setting is not accidentally changed. Clean the condenser coils and ensure adequate ventilation. Also check that the door (if any) is sealed correctly. If the issue persists, contact a qualified technician for refrigerant inspection.
Can I use the MDD78S-E for beverages other than beer?
Yes, you can dispense other cold beverages like ciders, cold brew coffee, or soft drinks, provided they are carbonated and served under pressure. Use appropriate gaskets and clean the system thoroughly between product changes.
How do I replace the tap or other spare parts?
Turn off the gas supply and relieve pressure from the lines. Unscrew the tap from the tower using a suitable wrench and install the new tap with PTFE tape. Other spare parts like couplers and O-rings are modular and can be replaced with simple tools.
Is the MDD78S-E energy efficient?
The MDD78S-E uses R290 refrigerant and automatic defrost, which reduces energy consumption. It is rated at 350 W and maintains temperature efficiently with proper ventilation. Ensure the door seals are intact to minimize energy waste.
What safety precautions should I follow?
Always unplug the unit before cleaning or servicing. Ensure the CO2 cylinder is secured upright and the pressure relief valve is working. Do not block the ventilation openings. Keep the dispenser away from heat sources and handle refrigerant leaks professionally.
User questions about MDD78S-E Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MDD78S-E - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDD78S-E by Micro Matic.
USER MANUAL MDD78S-E Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : MDD78S-E
Category : Uncategorized