METRO-H-16PSSKR - Uncategorized Micro Matic - Free user manual and instructions
Find the device manual for free METRO-H-16PSSKR Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispensing System |
| Brand | Micro Matic |
| Model | METRO-H-16PSSKR |
| Compatible Keg Types | Standard US Sankey, European D-System, and G-System |
| Operating Pressure | 10–30 psi (recommended 12–15 psi) |
| Gas Connection | 3/8" flare nut for CO2 supply |
| Beer Connection | 5/16" tail piece for beverage line |
| Material | Chrome-plated brass body with stainless steel internal components |
| Dimensions (Height x Diameter) | 4.5 in x 2.5 in (11.4 cm x 6.4 cm) |
| Weight | 1.2 lbs (0.54 kg) |
| Installation Type | Keg coupler (direct mount to keg valve) |
| Cleaning | Disassemble and soak in warm soapy water; rinse thoroughly |
| Maintenance | Replace o-rings annually; lubricate with food-grade silicone grease |
| Compliance Standards | NSF/ANSI Standard 18 for food equipment |
| Warranty | 1 year limited manufacturer warranty |
| Country of Origin | Denmark |
Frequently Asked Questions - METRO-H-16PSSKR Micro Matic
How do I connect the METRO-H-16PSSKR to a keg?
First, ensure the keg is cold and pressurized. Align the coupler's ball lock pins with the keg valve slots, then push down and twist clockwise to lock. For D or G systems, use the appropriate adapter.
What type of gas is needed?
Use food-grade CO2 at a regulated pressure of 12-15 psi. Higher pressures may over-carbonate the beer.
Can I use this coupler for home brewing?
Yes, it works with standard home brew kegs using a Sankey or D-System valve. You may need a conversion kit for pin-lock kegs.
How do I clean the coupler?
Disassemble by removing the probe and spring. Soak all parts in hot water with mild detergent for 15 minutes. Use a bottle brush to scrub the beer path. Rinse and air dry.
Why is my beer foamy?
Foam can result from high gas pressure, warm beer, or a dirty coupler. Check pressure is 12-15 psi, beer temperature 38-40°F, and clean the coupler thoroughly.
What does the model number METRO-H-16PSSKR mean?
It indicates a Micro Matic European TRO type coupler with a 16-inch probe length for half-barrel kegs, and PSSKR stands for a specific internal flow configuration.
Is this coupler compatible with commercial kegs?
Yes, it is designed for standard US and European commercial kegs. Always verify the keg type; some breweries use proprietary couplers.
How often should o-rings be replaced?
Replace o-rings annually or sooner if you notice leaks. Use a food-grade silicone lubricant to extend life.
Can I disassemble the coupler for deep cleaning?
Absolutely. Unscrew the top cap, remove the probe and spring. All seals are replaceable. Refer to the exploded view in the manual.
Where can I get replacement parts?
Parts like o-rings, springs, and probes are available from Micro Matic dealers or online at sites like Micromatic.com. Use part numbers from the manual.
User questions about METRO-H-16PSSKR Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual METRO-H-16PSSKR - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. METRO-H-16PSSKR by Micro Matic.
USER MANUAL METRO-H-16PSSKR Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : METRO-H-16PSSKR
Category : Uncategorized