MTB-4KR - Uncategorized Micro Matic - Free user manual and instructions
Find the device manual for free MTB-4KR Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispensing System (Kegerator) |
| Brand | Micro Matic |
| Model | MTB-4KR |
| Number of Taps | 4 |
| Dimensions (W x H x D) | 20 x 24 x 16 inches (50 x 60 x 40 cm) |
| Weight | Approximately 26 lbs (12 kg) |
| Power Supply | 120V/220V AC, 50/60 Hz (selectable) |
| Power Consumption | 150 W |
| Cooling System | Compressor-based forced air cooling |
| Temperature Range | 35°F – 45°F (1°C – 7°C) |
| CO2 Pressure Range | 10 – 15 PSI (adjustable) |
| Compatible Keg Types | Standard American half-barrel and slim quarter kegs |
| Material | Stainless steel and high-impact plastic |
| Included Components | CO2 regulator, 5 ft beer line, 3 ft gas line, stainless steel tap faucets |
| Installation | Countertop or under-counter with proper ventilation |
| Cleaning Instructions | Flush beer lines with warm water and cleaning solution after each keg change |
| Safety Features | Pressure relief valve, insulated power cord, automatic shut-off for compressor |
| Maintenance | Regularly check gauges for leaks; replace gaskets as needed |
| Repairability | Modular design for easy access to internal components |
| Country of Origin | Denmark |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - MTB-4KR Micro Matic
How do I set up the MTB-4KR for the first time?
First, place the unit on a stable, level surface. Connect the CO2 cylinder to the regulator, then attach the gas line to the keg coupler. Slide the coupler onto the keg and open the CO2 valve slowly. Set the pressure to 12 PSI. Plug the unit into a grounded outlet and allow it to cool for at least 2 hours before dispensing.
What type of CO2 regulator is included?
The MTB-4KR includes a dual-gauge regulator that shows both cylinder pressure and delivery pressure. It is adjustable from 0 to 30 PSI, with a recommended serving range of 10–15 PSI.
How do I clean the beer lines?
Turn off the CO2 and remove the keg. Mix a cleaning solution of warm water and beer line cleaner (available from Micro Matic). Pump the solution through the lines using the cleaning pump or a pressurized adapter. Rinse thoroughly with fresh water and then reattach the keg.
Why is the beer too foamy?
Foamy beer usually indicates the pressure is too high or the beer is too warm. Check that the pressure is set between 10 and 12 PSI and that the temperature is below 40°F. Also ensure the beer lines are free of obstructions.
Can I use the dispenser with different keg brands?
Yes, the MTB-4KR is compatible with standard D-style and S-style keg couplers. You may need to change the coupler if you switch between American and European keg types.
How do I adjust the temperature?
The temperature is controlled by a digital thermostat on the front panel. Press the up/down arrows to set the desired temperature between 35°F and 45°F. The compressor will run until the set point is reached.
What maintenance is required?
Regular maintenance includes cleaning the beer lines every 2–3 weeks, checking the CO2 pressure gauges for accuracy, and inspecting gaskets for wear. The condenser coils should be vacuumed every 6 months to ensure efficient cooling.
Is the unit safe to leave on overnight?
Yes, the compressor has an automatic shut-off and the system is designed for continuous operation. However, always ensure the CO2 valve is closed when the dispenser is not in use for extended periods to prevent pressure buildup.
How does the cooling system work?
The MTB-4KR uses a forced-air cooling system that circulates cold air around the keg to maintain a consistent temperature. This allows for faster chilling and even temperature distribution.
Where can I find replacement parts?
Replacement parts can be ordered directly from Micro Matic or authorized distributors. Common parts such as faucets, gaskets, and regulators are available online. Use the model number MTB-4KR to ensure compatibility.
User questions about MTB-4KR Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MTB-4KR - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTB-4KR by Micro Matic.
USER MANUAL MTB-4KR Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : MTB-4KR
Category : Uncategorized