OP1140 - Printer Océ - Free user manual and instructions
Find the device manual for free OP1140 Océ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Océ |
| Model | OP1140 |
| Product Type | Printer |
| Print Technology | Laser |
| Print Resolution | 1200 x 1200 dpi |
| Print Speed | Up to 40 ppm (A4) |
| Paper Handling | Standard input tray, multi-purpose tray, duplex unit |
| Connectivity | USB 2.0, Ethernet 10/100/1000 Base-T |
| Memory | 512 MB RAM |
| Display | LCD control panel |
| Dimensions (W x D x H) | 500 x 500 x 500 mm (approx.) |
| Weight | 30 kg (approx.) |
| Power Supply | 220-240V AC, 50/60 Hz |
| Power Consumption | Max 800W, standby 50W |
| Noise Level | Operating: 50 dB, Standby: 30 dB |
| Monthly Duty Cycle | Up to 100,000 pages |
| Duplex Printing | Automatic |
| Network Functions | Print server, web management |
| Maintenance | Replaceable toner cartridge, drum unit, and fuser |
| Safety Certifications | CE, Energy Star |
Frequently Asked Questions - OP1140 Océ
How do I load paper into the Océ OP1140 printer?
Open the main input tray, slide the paper guides to the width of the paper, then place a stack of paper with the print side facing down. Adjust the guides to fit snugly, then push the tray back into the printer. For the multipurpose tray, flip it down, insert the paper, and adjust the guides. Always ensure the paper is not wrinkled or damp to avoid paper jams.
How do I replace the toner cartridge in the OP1140?
Turn off the printer and open the front cover. Remove the old toner cartridge by pulling it straight out. Take the new cartridge out of its packaging, shake it gently to distribute the toner, and insert it into the slot until it clicks securely. Close the front cover and turn the printer on. The printer will automatically recognize the new cartridge.
What should I do if the printer shows a paper jam error?
First, turn off the printer and unplug it. Open the side and rear covers to access the jammed paper. Gently pull the paper out in the direction of the paper path, avoiding tearing. Check the input trays and fuser area for any remaining pieces. Once clear, close all covers and restart the printer. If the error persists, inspect the paper guides for obstruction.
How can I connect the Océ OP1140 to my network?
Connect an Ethernet cable from the printer to your router or switch. On the printer control panel, navigate to Settings > Network Setup > Ethernet, and select Automatic IP or manually assign an IP address. Then install the network driver on your computer using the software CD or download from the Océ website. You can also use the web management interface for advanced configuration.
How often should I perform maintenance on the OP1140?
Regular maintenance extends the printer's life. Clean the exterior and interior dust monthly using a soft, lint-free cloth. Replace the drum unit after approximately 30,000 pages and the fuser after 100,000 pages. Use only genuine Océ parts for optimal performance.
What type of paper is recommended for the OP1140?
The printer supports a wide range of media, including plain paper (60-90 g/m²), recycled paper, envelopes, labels, and transparency films. For best results, use paper that meets IEC 60598 specifications and avoid textured or coated paper unless specified. The multipurpose tray handles heavier media up to 200 g/m².
Why does the print quality appear faded or streaky?
Faded print is often due to low toner. Check the toner level and replace if necessary. If streaks appear, the drum may be dirty or damaged. Run the printer's cleaning cycle from the maintenance menu. Also, verify that the paper is dry and of the correct type. If the issue persists, consult the troubleshooting section of the manual.
How do I clear the printer's error code?
Error codes are displayed on the LCD. Press the '''Stop''' or '''Reset''' button to clear the error. If the error persists, identify the code in the manual. Common errors include paper jam (E01), toner low (E02), and fuser error (E05). Power cycle the printer after resolving the issue. For severe errors, contact Océ technical support.
Can I print on both sides of the paper automatically?
Yes, the OP1140 features automatic duplex printing. To use it, select 'Duplex' or 'Two-Sided' in the print driver settings. Choose the binding orientation (long edge or short edge). The printer will automatically flip the paper for the second side. This reduces paper usage by up to 50%.
How do I install the driver on Windows without the CD?
Visit the official Océ website and download the latest driver for the OP1140 model. Run the installer and choose the connection type (USB or network). Follow the on-screen instructions. For network printers, select 'Network Printer' and enter the printer's IP address. After installation, restart your computer to complete the setup.
User questions about OP1140 Océ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual OP1140 - Océ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OP1140 by Océ.
USER MANUAL OP1140 Océ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Océ
Model : OP1140
Category : Printer