MS8392-EV - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free MS8392-EV Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Brand | Vivotek |
| Model | MS8392-EV |
| Image Sensor | 1/2.7" Progressive CMOS |
| Effective Pixels | 2592 x 1944 (5 Megapixel) |
| Lens | Fixed lens, f=2.8mm, F1.6 |
| Night Vision | IR LED, range up to 30m |
| Video Compression | H.265, H.264, MJPEG |
| Field of View | 89° horizontal, 68° vertical |
| Durability | IP67 weatherproof housing |
| Power | IEEE 802.3af PoE or DC 12V |
| Dimensions | Ø 110 x 80 mm (approx.) |
| Weight | 450 g (approx.) |
| Storage | MicroSD/SDHC/SDXC slot (up to 256GB) |
| Main Functions | Motion detection, Tamper alarm, WDR, IR night vision |
| Network | RJ-45 10/100Mbps Ethernet, IPv4/IPv6 |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Management | Web-based configuration, SNMP, ONVIF compliant |
| Maintenance | Clean lens with soft, dry cloth; check firmware updates |
| Safety | Built-in heater for extreme cold, surge protection |
| Spare Parts and Reparability | Modular design for easy replacement of lens and IR board |
| General Information | Free user manual and instructions available on Notice-Facile.com |
Frequently Asked Questions - MS8392-EV Vivotek
How to reset the Vivotek MS8392-EV to factory settings?
Press and hold the reset button on the camera for at least 10 seconds while the unit is powered on. Release the button and wait for the camera to reboot. The factory defaults are restored.
What power supply is required for the MS8392-EV?
The camera supports Power over Ethernet (PoE) (IEEE 802.3af) or an external DC 12V power adapter. PoE simplifies installation by using a single network cable for both power and data.
Is the MS8392-EV suitable for outdoor use?
Yes, the housing has an IP67 rating, meaning it is dust-tight and protected against temporary submersion in water. It also includes a heater for operation in temperatures as low as -20°C.
How to access the camera remotely over the internet?
Set up port forwarding on your router to forward HTTP/HTTPS ports to the camera's local IP address. Alternatively, use Vivotek's cloud services or a VPN for secure remote access.
Does the MS8392-EV support local storage?
Yes, it has a MicroSD card slot supporting SDXC cards up to 256GB. You can record video directly to the card without an NVR or recording software.
What video compression formats are supported?
The camera supports H.265 (HEVC), H.264, and MJPEG. H.265 delivers high-quality video with reduced bandwidth and storage requirements.
How to configure motion detection on the camera?
Log into the camera's web interface, go to the 'Events' or 'Motion Detection' section, enable motion detection, and set the sensitivity and desired detection zones. You can then set triggers for email alerts or recording.
What is the maximum resolution of the MS8392-EV?
The camera provides a maximum resolution of 2592 x 1944 pixels (5 Megapixels). This provides clear and detailed images for surveillance.
Is the camera compatible with third-party NVR software?
Yes, the camera is ONVIF compliant, making it compatible with a wide range of third-party video management systems and NVRs that support ONVIF profiles.
What is the field of view of the lens?
The fixed lens provides an approximate horizontal field of view of 89° and vertical field of view of 68°, suitable for monitoring large rooms or narrow corridors.
User questions about MS8392-EV Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual MS8392-EV - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS8392-EV by Vivotek.