DV-1104 - Video Surveillance IDIS - Free user manual and instructions
Find the device manual for free DV-1104 IDIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | 4-channel Digital Video Recorder (DVR) |
| Brand | IDIS |
| Model | DV-1104 |
| Video Compression | H.264 |
| Recording Resolution | Up to 1080p per channel |
| Number of Channels | 4 channels |
| Video Output | HDMI and VGA outputs |
| Audio | 1 audio input and 1 audio output (RCA) |
| Network Interface | 10/100 Mbps Ethernet (RJ-45) |
| Storage Capacity | Supports up to 6 TB SATA HDD |
| Remote Access | PC and mobile applications for live view and playback |
| Motion Detection | Configurable zones and sensitivity levels |
| Recording Modes | Continuous, scheduled, motion and event detection |
| Playback | Simultaneous live viewing and playback |
| Backup Function | USB port for archive to external storage |
| Power Supply | 12V DC adapter |
| Dimensions (W x H x D) | 300 x 45 x 210 mm |
| Weight | Approximately 1.5 kg |
| Operating Temperature | 0°C to 40°C |
| Security | Multi-level password protection and secure transmission |
| Maintenance | Clean the device surface with a dry cloth |
| Spare Parts and Repairability | Internally accessible SATA HDD and replaceable cooling fan |
Frequently Asked Questions - DV-1104 IDIS
How to connect the DV-1104 to a local network?
Connect the Ethernet cable to the RJ-45 port on the rear panel, then plug the other end to your router or switch. Use the device menu to set an IP address (DHCP or static). For remote access, configure port forwarding on your router.
Can I use IP cameras with the DV-1104?
Yes, the DV-1104 supports recording from IP cameras. Add cameras via the Camera Setup menu using their IP address, credentials, and protocol (ONVIF or manufacturer-specific).
How do I enable motion detection?
Go to Settings > Motion Detection. Enable motion detection, then draw detection zones on the image. Adjust sensitivity and schedule. Events can trigger recording and send notifications.
How can I perform a factory reset?
Use the System Setup menu and select Factory Reset. Alternatively, press and hold the RESET button on the rear panel for 5 seconds. All settings will return to default.
How do I back up recorded video?
Insert a USB drive into the USB port, then navigate to Playback and select the time range. Choose Export and select the file format (e.g., AVI) and the target device.
What is the maximum storage capacity of the DV-1104?
The DVR supports one SATA HDD up to 6 TB. To replace it, remove the cover, disconnect the existing drive, and install the new one. Format the drive via the Storage menu.
How can I update the firmware?
Download the latest firmware from the IDIS website to a USB flash drive. In the DVR menu, go to System > Update. Select the USB drive and follow the on-screen instructions. Do not power off during the update.
How do I access the DVR remotely?
Register the DVR on the IDIS Mobile app or PC software via the system's QR code or the device's serial number. For a public Internet connection, configure port forwarding or use the IDIS DDNS service.
How should I clean the DV-1104?
Disconnect the power supply, then wipe the exterior casing with a soft, dry cloth. Avoid using wet or abrasive products. Ensure ventilation holes are free of dust.
What should I do if the DVR doesn't start up?
Check that the power adapter is properly connected and the power outlet works. Make sure the hard disk is correctly connected. If the front panel LEDs remain off, try a factory reset or contact IDIS support.
User questions about DV-1104 IDIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video Surveillance in PDF format for free! Find your manual DV-1104 - IDIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DV-1104 by IDIS.