DC-D4811WRX-A - Security Camera IDIS - Free user manual and instructions
Find the device manual for free DC-D4811WRX-A IDIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | IDIS |
| Model | DC-D4811WRX-A |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 2 Megapixel (1920x1080) |
| Lens Type | Fixed, 2.8mm |
| Field of View | 105° Horizontal |
| Night Vision | Up to 30m with IR LEDs |
| Video Compression | H.265, H.264 |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Power Consumption | Max 7W |
| Dimensions (W x H x D) | 70 x 60 x 140 mm |
| Weight | 0.5 kg |
| Weatherproof Rating | IP66 |
| Operating Temperature | -40°C to 50°C |
| Storage | microSD slot up to 256GB |
| Audio | Built-in microphone |
| Network Protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, FTP, NTP, RTSP |
| ONVIF | Profile G, T |
| Motion Detection | Yes, configurable zones |
| Warranty | 3 Years |
| Certifications | CE, FCC |
| Mount Type | Ceiling / Wall mount |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Use only with approved power source |
Frequently Asked Questions - DC-D4811WRX-A IDIS
How do I reset the camera to factory defaults?
Press and hold the reset button for 10 seconds using a pin. The camera will reboot and restore all settings, including the default IP address.
What is the default IP address of the camera?
The default IP address is 192.168.1.100. Ensure your PC is on the same subnet to access the web interface.
Can this camera be used outdoors?
Yes, the DC-D4811WRX-A has an IP66 weatherproof rating, making it suitable for outdoor installation in rain or dust.
How do I install the microSD card?
Remove the cover on the side of the camera to access the microSD slot. Insert the card with the contacts facing the camera until it clicks.
Does the camera support audio?
Yes, it has a built-in microphone for audio capture. Two-way audio requires an external speaker (not included).
How can I view the camera remotely?
Use the IDIS Viewer or any ONVIF-compatible software. Forward ports (e.g., 80, 554) on your router and access via WAN IP or DDNS.
What is the recommended cleaning procedure?
Gently wipe the lens and housing with a soft, dry cloth. Do not use alcohol or abrasive cleaners.
How do I connect the camera via PoE?
Connect an Ethernet cable from a PoE switch or injector to the camera's network port. The camera will power up automatically.
What should I do if there is no video feed?
Check network connectivity and power. Verify that the IP address is correct and the camera is not blocked by a firewall. Try a browser or VLC on RTSP stream.
How to update the camera firmware?
Download the latest firmware from IDIS support. Log into the web interface, go to System > Maintenance and upload the file. Do not power off during update.
User questions about DC-D4811WRX-A IDIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DC-D4811WRX-A - IDIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DC-D4811WRX-A by IDIS.