BWH 80 EUC - Water heater BEKO - Free user manual and instructions
Find the device manual for free BWH 80 EUC BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric water heater |
| Brand | Beko |
| Model | BWH 80 EUC |
| Capacity | 80 liters |
| Power supply | 220-240 V ~ 50 Hz |
| Power rating | 2000 W |
| Maximum water temperature | 75 °C |
| Adjustable thermostat | Yes, mechanical control |
| Heating time | About 3 to 4 hours |
| Installation type | Wall-mounted, vertical |
| Water connection size | 1/2 inch BSP |
| Safety valve | Pressure relief valve included |
| Anti-corrosion protection | Magnesium anode |
| Insulation | Polyurethane foam |
| Control | Dial thermostat with temperature scale |
| Display | Temperature indicator |
| Dimensions (approx.) | 45 x 80 x 48 cm |
| Weight (empty) | Approximately 25 kg |
| Energy efficiency class | C |
| Pressure rating | 8 bar |
| Replaceable parts | Heating element, thermostat, magnesium anode |
| Maintenance | Descale and replace anode regularly |
Frequently Asked Questions - BWH 80 EUC BEKO
What is the correct temperature to set on my Beko BWH 80 EUC water heater?
Set the thermostat to about 60 °C. This reduces scale buildup and limits bacterial growth while still providing comfortable hot water.
Why is my water heater not producing hot water?
Check the power supply, the circuit breaker and the thermostat setting. If all are normal, the heating element may be faulty and should be tested by a qualified technician.
How often should the magnesium anode be replaced?
Inspect the magnesium anode at least once a year and replace it every 2 years, or sooner if it is heavily eroded, to protect the tank against corrosion.
Why is the pressure relief valve leaking water?
A small amount of water from the pressure relief valve is normal during heating. If it leaks continuously, the water pressure may be too high or the expansion limited; have a professional check the pressure reducing valve or expansion vessel.
Can I install the BWH 80 EUC myself?
Installation must be carried out by a qualified technician in accordance with local plumbing and electrical regulations. A water heater contains both high voltage and pressurised hot water, so DIY installation is not recommended.
How long does it take to heat 80 liters of water?
With a 2000 W heating element and full tank, the first warm-up takes approximately 3 to 4 hours, depending on the incoming cold water temperature.
Why do I hear noises during heating?
Rumbling or popping sounds are often caused by sediment and scale at the bottom of the tank. Regular descaling helps reduce noise and maintains heating efficiency.
What energy efficiency class does this model have?
The energy efficiency class is C, which is typical for electric storage water heaters. Using a timer and setting the thermostat to 60 °C can reduce standby losses and electricity consumption.
Does the water heater need to be drained when unused for a long time?
If the unit may be exposed to freezing temperatures, drain it completely and switch off the power. For longer idle periods without frost, you can keep it on or turn it off at the breaker, but always disconnect the power before any maintenance.
What spare parts can I buy for this model?
Commonly available spare parts include the thermostat, heating element, magnesium anode and the pressure relief valve. Always use genuine Beko parts to guarantee safe and reliable operation.
User questions about BWH 80 EUC BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual BWH 80 EUC - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BWH 80 EUC by BEKO.