PRO800BZ - Uncategorized AccessPRO - Free user manual and instructions
Find the device manual for free PRO800BZ AccessPRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Reader |
| Brand | AccessPRO |
| Model | PRO800BZ |
| Color | Black |
| Connectivity | Wiegand 26-bit |
| Read Technology | RFID Proximity (125 kHz) |
| Read Range | Up to 5 cm |
| Power Supply | 12V DC |
| Current Consumption | 100 mA (typical) |
| Dimensions (HxWxD) | 115 x 75 x 20 mm |
| Weight | 150 g |
| Housing Material | ABS plastic |
| Protection Rating | IP65 |
| Interface | LED indicator, internal buzzer |
| Mounting | Wall mount with screws (included) |
| Operating Temperature | -20°C to 60°C |
| Compatibility | Standard Wiegand access control panels |
| Security | Tamper switch included |
| Maintenance | Clean with soft dry cloth |
| Spare Parts | Not user serviceable; contact dealer |
| Certifications | CE, FCC |
Frequently Asked Questions - PRO800BZ AccessPRO
How do I connect the PRO800BZ to my access control panel?
Connect the Wiegand wires (DATA0, DATA1) to the corresponding inputs on your access control panel. Power with 12V DC and ensure common ground.
What is the read range of the PRO800BZ?
The read range is up to 5 cm for most 125 kHz proximity cards. This range may vary depending on the card type and environment.
Can I use the device outdoors?
Yes, the PRO800BZ has an IP65 rating, making it resistant to dust and water jets. It can be installed in outdoor locations, but avoid direct exposure to heavy rain.
How do I reset the device to factory settings?
The PRO800BZ does not have end-user reset functionality. If you need to reconfigure it, consult your system administrator or the installation manual.
What should I do if the LED does not light up?
Check the power supply (12V DC) and wiring connections. Ensure the voltage is stable and the wires are properly connected. If the issue persists, contact your dealer.
Is the device compatible with all access control panels?
The device supports the Wiegand 26-bit protocol, which is widely used in access control systems. Please verify that your panel supports this standard.
How do I clean the reader?
Use a soft, dry cloth to wipe the surface. Do not use solvents or abrasive cleaners, as they may damage the housing.
Can I mount the reader on a metal surface?
Mounting on a metal surface may reduce the read range. Use a mounting bracket or install a spacer to maintain performance.
What is the operating temperature range?
The PRO800BZ operates within -20°C to 60°C. Avoid exposing it to temperatures beyond these limits to ensure reliable performance.
What does the tamper switch do?
The tamper switch triggers an alarm signal if the reader is removed from its mounting. Connect it to your access control panel for security monitoring.
User questions about PRO800BZ AccessPRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PRO800BZ - AccessPRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO800BZ by AccessPRO.
USER MANUAL PRO800BZ AccessPRO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AccessPRO
Model : PRO800BZ
Category : Uncategorized