VA-1102B-WYQ - Receiver Seco-Larm - Free user manual and instructions
Find the device manual for free VA-1102B-WYQ Seco-Larm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Receiver |
| Brand | Seco-Larm |
| Model | VA-1102B-WYQ |
| Frequency | 433 MHz |
| Number of Channels | 1 |
| Input Power | 12-24 V AC/DC |
| Current Consumption | 30 mA (standby), 100 mA (active) |
| Relay Output | Form C (NC/NO/COM), 1A @ 30V |
| Range (Open Field) | Up to 500 ft (152 m) |
| Operating Temperature | -30°C to +65°C |
| Dimensions (H x W x D) | 2.5 x 3.5 x 1.2 inches |
| Weight | 0.15 lbs (68 g) |
| Housing Material | ABS plastic |
| Connection Type | Screw terminals |
| LED Indicator | Red (power), Green (signal) |
| Compatible Transmitters | Seco-Larm VA-1102 series transmitters |
| Mounting | Wall mount (screws included) |
| Maintenance | Keep dry; clean with soft cloth |
| Safety | Power off before wiring; use appropriate voltage |
| Spare Parts | Not available separately; replace unit |
| Repairability | Non-repairable; contact support for replacement |
| Certifications | FCC, CE |
| Manual Language | English |
| Warranty | 1 year limited |
Frequently Asked Questions - VA-1102B-WYQ Seco-Larm
What is the range of the VA-1102B-WYQ receiver?
The range is up to 500 feet (152 meters) in open field conditions, but may be reduced by obstacles.
Can I use this receiver with other brands of transmitters?
No, it is designed to work only with Seco-Larm VA-1102 series transmitters.
How do I wire the receiver to my alarm system?
Connect the common, normally open, and normally closed terminals to your alarm panel. Power the receiver with 12-24V AC/DC.
What does the LED indicator mean?
A steady red LED indicates power is on. A flashing green LED shows signal reception from a transmitter.
How do I reset the receiver?
There is no reset button. Simply cycle power by disconnecting and reconnecting the power supply.
Can I mount the receiver outdoors?
It is designed for indoor use only. If outdoor use is required, place it inside a weatherproof enclosure.
What type of power supply should I use?
Use a 12-24V AC or DC power supply, such as a plug-in transformer or security panel output. Current draw is under 100mA.
How many transmitters can I pair with one receiver?
This single-channel receiver can pair with one transmitter at a time. Each receiver learns one unique code.
Does the receiver have a tamper protection?
No, there is no built-in tamper switch. For tamper protection, mount the receiver in a secure location.
Where can I find the user manual?
The manual is available for free download in PDF format on the manufacturer's website or at notice-facile.com.
User questions about VA-1102B-WYQ Seco-Larm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual VA-1102B-WYQ - Seco-Larm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VA-1102B-WYQ by Seco-Larm.
USER MANUAL VA-1102B-WYQ Seco-Larm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Seco-Larm
Model : VA-1102B-WYQ
Category : Receiver